Booting 'CentOS (xen 3.0.5-rc3 / 2.6.18-xen0)' root (hd0,0) Filesystem type is ext2fs, partition type 0xfd kernel /xen-3.0.5-rc3_2.6.18.gz dom0_mem=256M pci=routeirq com1=9600,8n1 [Multiboot-elf, <0x100000:0xa1480:0x51b80>, shtab=0x1f3078, entry=0x100000] module /vmlinuz-2.6.18-xen0 root=/dev/md1 ro console=tty0 #pci=routeirq [Multiboot-module @ 0x1f4000, 0x356a94 bytes] module /initrd-2.6.18-xen0.img [Multiboot-module @ 0x54b000, 0x361600 bytes] __ __ _____ ___ ____ _____ \ \/ /___ _ __ |___ / / _ \ | ___| _ __ ___|___ / \ // _ \ '_ \ |_ \| | | ||___ \ __| '__/ __| |_ \ / \ __/ | | | ___) | |_| | ___) |__| | | (__ ___) | /_/\_\___|_| |_| |____(_)___(_)____/ |_| \___|____/ http://www.cl.cam.ac.uk/netos/xen University of Cambridge Computer Laboratory Xen version 3.0.5-rc3 (root@xxxxxxxxx) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) Thu Apr 26 21:44:15 SGT 2007 Latest ChangeSet: unavailable (XEN) Command line: /xen-3.0.5-rc3_2.6.18.gz dom0_mem=256M pci=routeirq com1=9600,8n1 (XEN) 0000000000000000 - 0000000000098000 (usable) (XEN) 0000000000098000 - 00000000000a0000 (reserved) (XEN) 00000000000ce000 - 00000000000d0000 (reserved) (XEN) 00000000000e0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 000000003ff70000 (usable) (XEN) 000000003ff70000 - 000000003ff7b000 (ACPI data) (XEN) 000000003ff7b000 - 000000003ff80000 (ACPI NVS) (XEN) 000000003ff80000 - 0000000040000000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fec00000 - 00000000fec10000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 00000000ff800000 - 00000000ffc00000 (reserved) (XEN) 00000000fffffc00 - 0000000100000000 (reserved) (XEN) System RAM: 1023MB (1047584kB) (XEN) Xen heap: 10MB (10256kB) (XEN) Domain heap initialised: DMA width 32 bits (XEN) PAE enabled, limit: 16 GB (XEN) Processor #0 15:4 APIC version 20 (XEN) Processor #1 15:4 APIC version 20 (XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 (XEN) IOAPIC[1]: apic_id 3, version 32, address 0xfec10000, GSI 24-47 (XEN) Enabling APIC mode: Flat. Using 2 I/O APICs (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) ***TICKER_INIT 0 0 (XEN) Detected 3000.218 MHz processor. (XEN) CPU0: Intel(R) Xeon(TM) CPU 3.00GHz stepping 03 (XEN) Mapping cpu 0 to node 255 (XEN) ***TICKER_INIT 1 0 (XEN) Booting processor 1/1 eip 90000 (XEN) Mapping cpu 1 to node 255 (XEN) CPU1: Intel(R) Xeon(TM) CPU 3.00GHz stepping 03 (XEN) Total of 2 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) Platform timer is 1.193MHz PIT (XEN) Brought up 2 CPUs (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 32-bit, PAE, lsb (XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0xc0100000 -> 0xc04d7bfc (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 000000003e000000->000000003f000000 (61440 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: c0100000->c04d7bfc (XEN) Init. ramdisk: c04d8000->c0839600 (XEN) Phys-Mach map: c083a000->c087a000 (XEN) Start info: c087a000->c087a46c (XEN) Page tables: c087b000->c0886000 (XEN) Boot stack: c0886000->c0887000 (XEN) TOTAL: c0000000->c0c00000 (XEN) ENTRY ADDRESS: c0100000 (XEN) Dom0 has maximum 2 VCPUs (XEN) Initrd len 0x361600, start at 0xc04d8000 (XEN) Scrubbing Free RAM: .......done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: Errors and warnings (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) (XEN) Xen is relinquishing VGA console. (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen). Linux version 2.6.18-xen0 (root@xxxxxxxxxxxxxxx) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #2 SMP Thu Apr 26 21:48:05 SGT 2007 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000010800000 (usable) 0MB HIGHMEM available. 264MB LOWMEM available. NX (Execute Disable) protection: active found SMP MP-table at 000f6700 DMI present. ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[24]) IOAPIC[1]: apic_id 3, version 32, address 0xfec10000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Enabling APIC mode: Flat. Using 2 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) Detected 3000.389 MHz processor. Built 1 zonelists. Total pages: 67584 Kernel command line: root=/dev/md1 ro console=tty0 #pci=routeirq Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Xen reported: 3000.218 MHz processor. Console: colour VGA+ 80x50 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Software IO TLB enabled: Aperture: 2 megabytes Kernel range: c088a000 - c0a8a000 Address size: 24 bits vmalloc area: d1000000-f4ffe000, maxmem 2d7fe000 Memory: 248892k/270336k available (2319k kernel code, 12952k reserved, 829k data, 204k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5997.58 BogoMIPS (lpj=11995171) Mount-cache hash table entries: 512 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K Checking 'hlt' instruction... OK. Freeing SMP alternatives: 12k freed ACPI: Core revision 20060707 ENABLING IO-APIC IRQs Brought up 2 CPUs Initializing CPU#1 migration_cost=3 checking if image is initramfs... it is Freeing initrd memory: 3461k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH4 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 *10 11 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay xen_mem: Initialising balloon driver. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:00:02.0 IO window: disabled. MEM window: dd100000-dd1fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:03.0 IO window: disabled. MEM window: dd200000-dd2fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: dd300000-dd3fffff PREFETCH window: 50000000-500fffff PCI: Bridge: 0000:00:1e.0 IO window: 2000-2fff MEM window: dd400000-deffffff PREFETCH window: 50100000-501fffff ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 6, 327680 bytes) TCP bind hash table entries: 8192 (order: 5, 163840 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered Simple Boot Flag at 0x36 set to 0x1 audit: initializing netlink socket (disabled) audit(1177731029.176:1): initialized audit: cannot initialize inotify handle VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: Getting cpuindex for acpiid 0x2 ACPI: Getting cpuindex for acpiid 0x3 Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones [drm] Initialized drm 1.0.1 20051102 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Xen virtual console successfully installed as ttyS0 Event-channel device installed. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 17 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1460-0x1467, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x1468-0x146f, BIOS settings: hdc:pio, hdd:DMA hdd: CD-224E, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hdd: ATAPI 24X CD-ROM drive, 128kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid /usr/src/xen-3.0.5-rc3-src/linux-2.6.18-xen/drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode Freeing unused kernel memory: 204k freed USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001400 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 18, io base 0x00001420 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: irq 19, io mem 0xdd000400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected hdd: packet command error: status=0x51 { DriveReady SeekComplete Error } hdd: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } ide: failed opcode was: unknown md: raid1 personality registered for level 1 SCSI subsystem initialized sata_mv 0000:03:07.0: version 0.7 ACPI: PCI Interrupt 0000:03:07.0[A] -> GSI 26 (level, low) -> IRQ 20 sata_mv 0000:03:07.0: 32 slots 4 ports SCSI mode IRQ via INTx ata1: SATA max UDMA/133 cmd 0x0 ctl 0xD11A2120 bmdma 0x0 irq 20 ata2: SATA max UDMA/133 cmd 0x0 ctl 0xD11A4120 bmdma 0x0 irq 20 ata3: SATA max UDMA/133 cmd 0x0 ctl 0xD11A6120 bmdma 0x0 irq 20 ata4: SATA max UDMA/133 cmd 0x0 ctl 0xD11A8120 bmdma 0x0 irq 20 scsi0 : sata_mv ata1.00: ATA-6, max UDMA/100, 625142448 sectors: LBA48 ata1.00: ata1: dev 0 multi count 0 ata1.00: configured for UDMA/100 scsi1 : sata_mv ata2.00: ATA-6, max UDMA/100, 625142448 sectors: LBA48 ata2.00: ata2: dev 0 multi count 0 ata2.00: configured for UDMA/100 scsi2 : sata_mv ata3.00: ATA-7, max UDMA/133, 312581808 sectors: LBA48 NCQ (depth 0/32) ata3.00: configured for UDMA/133 scsi3 : sata_mv ata4.00: ATA-7, max UDMA/133, 312581808 sectors: LBA48 NCQ (depth 0/32) ata4.00: configured for UDMA/133 Vendor: ATA Model: WDC WD3200JD-00K Rev: 08.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB) sda: Write Protect is off SCSI device sda: drive cache: write back SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB) sda: Write Protect is off SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > sd 0:0:0:0: Attached scsi disk sda Vendor: ATA Model: WDC WD3200JD-00K Rev: 08.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) sdb: Write Protect is off SCSI device sdb: drive cache: write back SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) sdb: Write Protect is off SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 > sd 1:0:0:0: Attached scsi disk sdb Vendor: ATA Model: ST3160811AS Rev: 3.AA Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdc: 312581808 512-byte hdwr sectors (160042 MB) sdc: Write Protect is off SCSI device sdc: drive cache: write back SCSI device sdc: 312581808 512-byte hdwr sectors (160042 MB) sdc: Write Protect is off SCSI device sdc: drive cache: write back sdc: sd 2:0:0:0: Attached scsi disk sdc Vendor: ATA Model: ST3160811AS Rev: 3.AA Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdd: 312581808 512-byte hdwr sectors (160042 MB) sdd: Write Protect is off SCSI device sdd: drive cache: write back SCSI device sdd: 312581808 512-byte hdwr sectors (160042 MB) sdd: Write Protect is off SCSI device sdd: drive cache: write back sdd: sd 3:0:0:0: Attached scsi disk sdd md: Autodetecting RAID arrays. md: autorun ... md: considering sdb8 ... md: adding sdb8 ... md: sdb6 has different UUID to sdb8 md: sdb5 has different UUID to sdb8 md: sdb3 has different UUID to sdb8 md: sdb2 has different UUID to sdb8 md: sdb1 has different UUID to sdb8 md: adding sda8 ... md: sda6 has different UUID to sdb8 md: sda5 has different UUID to sdb8 md: sda3 has different UUID to sdb8 md: sda2 has different UUID to sdb8 md: sda1 has different UUID to sdb8 md: created md5 md: bind md: bind md: running: raid1: raid set md5 active with 2 out of 2 mirrors md: considering sdb6 ... md: adding sdb6 ... md: sdb5 has different UUID to sdb6 md: sdb3 has different UUID to sdb6 md: sdb2 has different UUID to sdb6 md: sdb1 has different UUID to sdb6 md: adding sda6 ... md: sda5 has different UUID to sdb6 md: sda3 has different UUID to sdb6 md: sda2 has different UUID to sdb6 md: sda1 has different UUID to sdb6 md: created md4 md: bind md: bind md: running: raid1: raid set md4 active with 2 out of 2 mirrors md: considering sdb5 ... md: adding sdb5 ... md: sdb3 has different UUID to sdb5 md: sdb2 has different UUID to sdb5 md: sdb1 has different UUID to sdb5 md: adding sda5 ... md: sda3 has different UUID to sdb5 md: sda2 has different UUID to sdb5 md: sda1 has different UUID to sdb5 md: created md2 md: bind md: bind md: running: raid1: raid set md2 active with 2 out of 2 mirrors md: considering sdb3 ... md: adding sdb3 ... md: sdb2 has different UUID to sdb3 md: sdb1 has different UUID to sdb3 md: adding sda3 ... md: sda2 has different UUID to sdb3 md: sda1 has different UUID to sdb3 md: created md1 md: bind md: bind md: running: raid1: raid set md1 active with 2 out of 2 mirrors md: considering sdb2 ... md: adding sdb2 ... md: sdb1 has different UUID to sdb2 md: adding sda2 ... md: sda1 has different UUID to sdb2 md: created md3 md: bind md: bind md: running: raid1: raid set md3 active with 2 out of 2 mirrors md: considering sdb1 ... md: adding sdb1 ... md: adding sda1 ... md: created md0 md: bind md: bind md: running: raid1: raid set md0 active with 2 out of 2 mirrors md: ... autorun DONE. hdd: packet command error: status=0x51 { DriveReady SeekComplete Error } hdd: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } ide: failed opcode was: unknown hdd: packet command error: status=0x51 { DriveReady SeekComplete Error } hdd: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } ide: failed opcode was: unknown kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. *************************************************************** *************************************************************** ** WARNING: Currently emulating unsupported memory accesses ** ** in /lib/tls glibc libraries. The emulation is ** ** slow. To ensure full performance you should ** ** install a 'xen-friendly' (nosegneg) version of ** ** the library, or disable tls support by executing ** ** the following as root: ** ** mv /lib/tls /lib/tls.disabled ** ** Offending process: modprobe (pid=382) ** *************************************************************** *************************************************************** Continuing... xen09.choon.net login: