| |
|
 |
|
 |
|
|
|
| |
|
|
xen-devel
[Xen-devel] [Fwd: [Xen-users] errors with make tools and make docs]
Hey guys,
I posted this error on xen-users and got no reply, so I figure I'd
have better luck here. It turns out that on my machine (Gentoo), the
directory /usr/include/dal exists and has the files dal.h and file.h
I tried simply changing the reference from dal/file_dal.h to dal/file.h
but there were continued problems. Apparently some of the variables
referenced and such do not exist. I'm appending that set of errors here:
building 'grub.fsys.reiser._pyreiser' extension
i686-pc-linux-gnu-gcc -pthread -fno-strict-aliasing -DNDEBUG -O2
-fomit-frame-pointer -DNDEBUG -m32 -march=i686 -Wall -Wstrict-prototypes
-Wdeclaration-after-statement -D__XEN_TOOLS__ -fPIC
-I/usr/include/python2.4 -c src/fsys/reiser/reisermodule.c -o
build/temp.linux-i686-2.4/src/fsys/reiser/reisermodule.o
-fno-strict-aliasing -Wall -Werror
src/fsys/reiser/reisermodule.c: In function 'file_dal_close':
src/fsys/reiser/reisermodule.c:49: error: 'dal_t' has no member named 'dev'
cc1: warnings being treated as errors
src/fsys/reiser/reisermodule.c:50: warning: implicit declaration of
function 'dal_free'
src/fsys/reiser/reisermodule.c: In function 'reiser_fs_open':
src/fsys/reiser/reisermodule.c:221: warning: implicit declaration of
function 'file_dal_open'
src/fsys/reiser/reisermodule.c:221: warning: assignment makes pointer
from integer without a cast
error: command 'i686-pc-linux-gnu-gcc' failed with exit status 1
make[2]: *** [build] Error 1
make[2]: Leaving directory `/usr/src/xen-3.0.3-testing.hg/tools/pygrub'
make[1]: *** [install] Error 2
make[1]: Leaving directory `/usr/src/xen-3.0.3-testing.hg/tools'
make: *** [install-tools] Error 2
Any ideas?
-Ricardo-
--- Begin Message ---
Two errors have come up, one while attempting make tools and another
while attempting make docs.
1) make tools fails while trying to compile pygrub
This is the error that I get, plus some information that comes beforehand:
make[2]: Entering directory `/usr/src/xen-3.0.3-testing.hg/tools/pygrub'
CFLAGS="-O2 -fomit-frame-pointer -DNDEBUG -m32 -march=i686 -Wall
-Wstrict-proto
ypes -Wdeclaration-after-statement -D__XEN_TOOLS__" python setup.py build
running build
running build_py
running build_ext
building 'grub.fsys.reiser._pyreiser' extension
i686-pc-linux-gnu-gcc -pthread -fno-strict-aliasing -DNDEBUG -O2
-fomit-frame-p
inter -DNDEBUG -m32 -march=i686 -Wall -Wstrict-prototypes
-Wdeclaration-after-s
atement -D__XEN_TOOLS__ -fPIC -I/usr/include/python2.4 -c
src/fsys/reiser/reise
module.c -o build/temp.linux-i686-2.4/src/fsys/reiser/reisermodule.o
-fno-stric
-aliasing -Wall -Werror
src/fsys/reiser/reisermodule.c:20:26: error: dal/file_dal.h: No such
file or di
ectory
src/fsys/reiser/reisermodule.c: In function 'file_dal_close':
src/fsys/reiser/reisermodule.c:49: error: 'dal_t' has no member named 'dev'
cc1: warnings being treated as errors
src/fsys/reiser/reisermodule.c:50: warning: implicit declaration of
function 'd
l_free'
src/fsys/reiser/reisermodule.c: In function 'reiser_fs_open':
src/fsys/reiser/reisermodule.c:221: warning: implicit declaration of
function '
ile_dal_open'
src/fsys/reiser/reisermodule.c:221: warning: assignment makes pointer
from inte
er without a cast
error: command 'i686-pc-linux-gnu-gcc' failed with exit status 1
make[2]: *** [build] Error 1
make[2]: Leaving directory `/usr/src/xen-3.0.3-testing.hg/tools/pygrub'
make[1]: *** [install] Error 2
make[1]: Leaving directory `/usr/src/xen-3.0.3-testing.hg/tools'
make: *** [install-tools] Error 2
I have read the README in the tools/pygrub directory, and have the
package progsreiserfs installed, as I'm running a Gentoo system and my
rootfs is formatted as reiserfs. I re-emerged progsreiserfs with no
improvement in behavior.
2) make docs fails when converting latex to html
Here's the error:
make[2]: Entering directory `/usr/src/xen-3.0.3-testing.hg/docs'
install -d -m0755 html/user
latex2html -split 0 -show_section_numbers -toc_depth 3 -nonavigation \
-numbered_footnotes -local_icons -noinfo -math -dir html/user \
src/user.tex 1>/dev/null 2>/dev/null
make[2]: *** [html/user/index.html] Error 2
make[2]: Leaving directory `/usr/src/xen-3.0.3-testing.hg/docs'
make[1]: *** [html] Error 2
rm user.dvi interface.dvi
make[1]: Leaving directory `/usr/src/xen-3.0.3-testing.hg/docs'
Now I have latex2html and all other packages listed as required by Xen
for documentation installed.
The second issue really isn't as important; I can get pdf and
man-pages and such built and installed without a problem. I do,
however, want and need the tools installed properly. Any help would be
appreciated.
-Ricardo-
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
--- End Message ---
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
| <Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Xen-devel] [Fwd: [Xen-users] errors with make tools and make docs],
Ricardo <=
|
|
|
| |
|
Home