Thanks.
Here is the output. BTW these cards are PCI-MSI, if that makes a difference.
Thanks- Padma
Ping –n Stats
>>>> ping -n 192.168.133.2
PING
192.168.133.2 (192.168.133.2) 56(84) bytes of data.
64 bytes from 192.168.133.2: icmp_seq=0 ttl=64
time=2400 ms
64 bytes from 192.168.133.2: icmp_seq=1 ttl=64
time=1400 ms
64 bytes from 192.168.133.2: icmp_seq=15 ttl=64
time=2410 ms
64 bytes from 192.168.133.2: icmp_seq=16 ttl=64
time=1410 ms
64 bytes from 192.168.133.2: icmp_seq=17 ttl=64
time=410 ms
64 bytes from 192.168.133.2: icmp_seq=18 ttl=64
time=7070 ms
64 bytes from 192.168.133.2: icmp_seq=19 ttl=64
time=6070 ms
Ping with tcpdump with icmp
>>>>ping 192.168.133.2
PING
192.168.133.2 (192.168.133.2) 56(84) bytes of data.
From 192.168.133.1 icmp_seq=0 Destination Host
Unreachable
From 192.168.133.1 icmp_seq=1 Destination Host
Unreachable
From 192.168.133.1 icmp_seq=2 Destination Host
Unreachable
64 bytes from 192.168.133.2: icmp_seq=3 ttl=64
time=1990 ms
64 bytes from 192.168.133.2: icmp_seq=4 ttl=64 time=990
ms
64 bytes from 192.168.133.2: icmp_seq=5 ttl=64
time=15.6 ms
64 bytes from 192.168.133.2: icmp_seq=6 ttl=64
time=4010 ms
64 bytes from 192.168.133.2: icmp_seq=7 ttl=64
time=3010 ms
64 bytes from 192.168.133.2: icmp_seq=8 ttl=64
time=2010 ms
64 bytes from 192.168.133.2: icmp_seq=9 ttl=64
time=1010 ms
64 bytes from 192.168.133.2: icmp_seq=10 ttl=64
time=10.7 ms
--- 192.168.133.2 ping statistics ---
22 packets transmitted, 8 received, +3 errors, 63%
packet loss, time 21021ms
rtt min/avg/max/mdev =
10.743/1631.395/4010.772/1316.715 ms, pipe 6
>>> tcpdump -i eth7 icmp
tcpdump: verbose output suppressed, use -v or -vv for
full protocol decode
listening on eth7, link-type EN10MB (Ethernet),
capture size 96 bytes
23:43:32.021469 IP 192.168.133.1 > 192.168.133.2:
icmp 64: echo request seq3
23:43:32.021473 IP 192.168.133.1 > 192.168.133.2:
icmp 64: echo request seq4
23:43:32.021751 IP 192.168.133.2 > 192.168.133.1:
icmp 64: echo reply seq 3
23:43:32.021754 IP 192.168.133.2 > 192.168.133.1:
icmp 64: echo reply seq 4
23:43:32.030887 IP 192.168.133.1 > 192.168.133.2:
icmp 64: echo request seq5
23:43:32.046498 IP 192.168.133.2 > 192.168.133.1:
icmp 64: echo reply seq 5
23:43:33.030840 IP 192.168.133.1 > 192.168.133.2:
icmp 64: echo request seq6
38 packets captured
38 packets received by filter
0 packets dropped by kernel
Ping with tcpdump arp
>>> ping 192.168.133.2
PING
192.168.133.2 (192.168.133.2) 56(84) bytes of data.
64 bytes from 192.168.133.2: icmp_seq=0 ttl=64
time=2896 ms
64 bytes from 192.168.133.2: icmp_seq=1 ttl=64
time=1890 ms
64 bytes from 192.168.133.2: icmp_seq=2 ttl=64
time=890 ms
64 bytes from 192.168.133.2: icmp_seq=3 ttl=64
time=28390 m34 packets transmitted, 32 received, 5% packet loss, time 33015ms
rtt min/avg/max/mdev = 380.263/13214.810/28390.176/8765.006
ms, pipe 30s
>>> tcpdump -i eth7 arp
tcpdump: verbose output suppressed, use -v or -vv for
full protocol decode
listening on eth7, link-type EN10MB (Ethernet),
capture size 96 bytes
0 packets captured
8 packets received by filter
0 packets dropped by kernel
-----Original Message-----
From: James Harper [mailto:james.harper@xxxxxxxxxxxxxxxx]
Sent: Wednesday, October 11, 2006 12:00 AM
To: Apparao, Padmashree K; xen-devel@xxxxxxxxxxxxxxxxxxx
Subject: RE: [Xen-devel] PCI-E networking
> In Xen (custome xen-unstable) however, a ping on each subnet
is very
> slooow. A ping takes about 3000ms or even more.
Is that 3000ms for the first reply or every reply?
Make sure that you ping the IP address and use the -n option to make
sure that DNS is not causing any issues.
Then start a ping and do a tcpdump of icmp and arp packets and send the
results of the first 3 pings or so here. "tcpdump -I eth0 icmp or
arp"
should do the trick.
James
Home