I am working with the Xen changeset 9459.
I am working on a 8-Way Intel Xeon/VT machine with 16 GB of RAM.
I am using SUSE sles-9 sp3 install for Dom0.
When I bring up a 4-way dom-vt(with windows or linux), the system
crashes with the following on the serial output.
This also happens when I try to bring up 2-way dom-vts, but not as
predictably.
Raj
----------------------
Error Output
----------------------
(XEN) (GUEST: 6) HVM Loader
(XEN) (GUEST: 6) Loading ROMBIOS ...
(XEN) (GUEST: 6) Loading Cirrus VGABIOS ...
(XEN) (GUEST: 6) Loading VMXAssist ...
(XEN) (GUEST: 6) VMX go ...
(XEN) (GUEST: 6) VMXAssist (Mar 29 2006)
(XEN) (GUEST: 6) Memory size 512 MB
(XEN) (GUEST: 6) E820 map:
(XEN) (GUEST: 6) 0000000000000000 - 000000000009F800 (RAM)
(XEN) (GUEST: 6) 000000000009F800 - 00000000000A0000 (Reserved)
(XEN) (GUEST: 6) 00000000000A0000 - 00000000000C0000 (Type 16)
(XEN) (GUEST: 6) 00000000000F0000 - 0000000000100000 (Reserved)
(XEN) (GUEST: 6) 0000000000100000 - 000000001FFFE000 (RAM)
(XEN) (GUEST: 6) 000000001FFFE000 - 000000001FFFF000 (Type 18)
(XEN) (GUEST: 6) 000000001FFFF000 - 0000000020000000 (Type 17)
(XEN) (GUEST: 6) 0000000020000000 - 0000000020003000 (ACPI NVS)
(XEN) (GUEST: 6) 0000000020003000 - 000000002000D000 (ACPI Data)
(XEN) (GUEST: 6) 00000000FEC00000 - 0000000100000000 (Type 16)
(XEN) (GUEST: 6)
(XEN) (GUEST: 6) Start BIOS ...
(XEN) (GUEST: 6) Starting emulated 16-bit real-mode: ip=F000:FFF0
(XEN) (GUEST: 6) rombios.c,v 1.138 2005/05/07 15:55:26 vruppert Exp $
(XEN) HVM_PIT: guest freq in cycles=150005273
(XEN) (GUEST: 6) Remapping master: ICW2 0x8 -> 0x20
(XEN) (GUEST: 6) Remapping slave: ICW2 0x70 -> 0x28
(XEN) (GUEST: 6) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50
vruppert Exp $ (XEN) (GUEST: 6) HVMAssist BIOS, 1 cpu, $Revision: 1.138
$ $Date: 2005/05/07 15:55:26 $
(XEN) (GUEST: 6)
(XEN) (GUEST: 6) ata0-0: PCHS=16383/16/63 translation=lba
LCHS=1024/255/63
(XEN) (GUEST: 6) ata0 master: QEMU HARDDISK ATA-2 Hard-Disk (8197
MBytes)
(XEN) (GUEST: 6) ata0 slave: Unknown device
(XEN) (GUEST: 6) ata1 master: QEMU CD-ROM ATAPI-4 CD-Rom/DVD-Rom
(XEN) (GUEST: 6) ata1 slave: Unknown device
(XEN) (GUEST: 6)
(XEN) (GUEST: 6) Booting from Hard Disk...
(XEN) ----[ Xen-3.0-unstable Not tainted ]----
(XEN) CPU: 6
(XEN) RIP: e010:[<ffff830000133a1e>] free_shadow_page+0x6e/0x8c0
(XEN) RFLAGS: 0000000000010246 CONTEXT: hypervisor
(XEN) rax: 0000000000000000 rbx: 00000000000064d4 rcx:
00000000808064d4
(XEN) rdx: ffff828400000000 rsi: 0000000000017c26 rdi:
0000000000017c26
(XEN) rbp: 00000000000064d4 rsp: ffff830000fe1dc8 r8:
00000000a0000004
(XEN) r9: 0000000000000000 r10: 0000000000000000 r11:
0000000000000000
(XEN) r12: 0000000000017c26 r13: 0000000000000000 r14:
0000000000000558
(XEN) r15: ffff83000019f480 cr0: 0000000080050033 cr3:
00000000b93fa000
(XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: 0000 cs: e010
(XEN) Xen stack trace from rsp=ffff830000fe1dc8:
(XEN) ffff8300002c5080 0000000000800227 00000000000244d8
ffff83000013c4c5
(XEN) 0000000000000000 ffff8284003b65f0 0000000000000000
00000000003b65f0
(XEN) 0000000000000000 0000000000017c26 0000000000000000
0000000000000558
(XEN) ffff83000019f480 ffff8300001352e3 ffff830000fa3500
0000003900150ce8
(XEN) ffff8300002c5080 ffff8300002c5080 ffff830000fa6080
0000000000050032
(XEN) 0000000000050032 0000000000000001 0000000000000000
ffff8300001353c0
(XEN) ffff830000fa6080 ffff830000154396 ffff830000fa6080
ffff830000fe1f28
(XEN) ffff830000fa6080 0000000000050032 0000000000000000
ffff83000015522f
(XEN) 000000000000681e ffff8300001b0260 0000000000000003
0000000000000000
(XEN) 0000000000000000 ffff830000155d5f ffff830000fa6080
0000000000060ea4
(XEN) 0000000000060ec4 0000000000000000 0000000000000000
ffff830000156736
(XEN) 0000000000000000 0000000000000000 0000000000000000
0000000000000000
(XEN) 0000000000060ec4 0000000000060ea4 0000000000000000
0000000000000000
(XEN) 0000000000000000 0000000000000000 0000000000050032
0000000000000000
(XEN) 0000000000000008 0000000000060ec0 0000000000007ffa
000000ef00000003
(XEN) 0000000000002c1c 0000000000002000 0000000000033216
00000000000014d0
(XEN) 0000000000000202 0000000000feb800 0000000000fe22f3
0000000000fef000
(XEN) 0000000000fef000 0000000000000006 ffff830000fa6080
(XEN) Xen call trace:
(XEN) [<ffff830000133a1e>] free_shadow_page+0x6e/0x8c0
(XEN) [<ffff83000013c4c5>] shadow_fault_64+0x8a5/0x9b0
(XEN) [<ffff8300001352e3>] free_shadow_pages+0x303/0x3a0
(XEN) [<ffff8300001353c0>] clear_all_shadow_status+0x40/0xd0
(XEN) [<ffff830000154396>] vmx_set_cr0+0x446/0x500
(XEN) [<ffff83000015522f>] vmx_cr_access+0xddf/0xe50
(XEN) [<ffff830000155d5f>] vmx_vmexit_handler+0x58f/0x8e0
(XEN) [<ffff830000156736>] vmx_asm_vmexit_handler+0x26/0x30
(XEN)
(XEN) Pagetable walk from 0000000000000578:
(XEN) L4 = 0000000000000000 ffffffffffffffff
(XEN)
(XEN) ****************************************
(XEN) Panic on CPU 6:
(XEN) CPU6 FATAL PAGE FAULT
(XEN) [error_code=0000]
(XEN) Faulting linear address: 0000000000000578
(XEN) ****************************************
(XEN)
(XEN) Reboot in five seconds...
------------------------------------------------------------------------
------------
Complete serial output.
------------------------------------------------------------------------
------------
root (hd0,0)
Filesystem type is reiserfs, partition type 0x83
kernel /boot/xen.gz dom0_mem=512M com1=115200,8n1 apic_verbosity=debug
[Multiboot-elf, <0x100000:0x804a0:0x30b60>, shtab=0x1b1078,
entry=0x100000]
module /boot/vmlinuz-2.6-xen0 root=/dev/sda1 selinux=0 resume=/dev/sda2
splas
h=silent showopts
[Multiboot-module @ 0x1b2000, 0x795f08 bytes]
module /boot/initrd-2.6-xen0
__ __ _____ ___ _ _ _
\ \/ /___ _ __ |___ / / _ \ _ _ _ __ ___| |_ __ _| |__ | | ___
\ // _ \ '_ \ |_ \| | | |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \
/ \ __/ | | | ___) | |_| |__| |_| | | | \__ \ || (_| | |_) | | __/
/_/\_\___|_| |_| |____(_)___/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___|
http://www.cl.cam.ac.uk/netos/xen
University of Cambridge Computer Laboratory
Xen version 3.0-unstable (root@site) (gcc version 3.3.3 (SuSE Linux))
Wed Mar 29 00:18:11 EST 2006
Latest ChangeSet: Tue Mar 28 21:21:26 2006 +0100 9459:db8266c27c4f
(XEN) Physical RAM map:
(XEN) 0000000000000000 - 000000000009dc00 (usable)
(XEN) 000000000009dc00 - 00000000000a0000 (reserved)
(XEN) 00000000000ce000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 0000000002670000 (usable)
(XEN) 0000000002670000 - 00000000026d6000 (ACPI data)
(XEN) 00000000026d6000 - 0000000002700000 (ACPI NVS)
(XEN) 0000000002700000 - 00000000e8000000 (usable)
(XEN) 00000000f8000000 - 00000000fec00000 (reserved)
(XEN) 00000000fffc0000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000810000000 (usable)
(XEN) System RAM: 32639MB (33422388kB)
(XEN) Xen heap: 13MB (13616kB)
(XEN) Using scheduler: Simple EDF Scheduler (sedf)
(XEN) found SMP MP-table at 000f8690
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: RSDP (v000 PTLTD ) @
0x00000000000f8660
(XEN) ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x06040000) @
0x000000000267d330
(XEN) ACPI: FADT (v004 UNISYS ZORRO 0x06040000 PTL 0x00000008) @
0x00000000026d501c
(XEN) ACPI: OEM1 (v001 UNISYS OEM1 0x06040000 LTP 0x06040000) @
0x00000000026d5110
(XEN) ACPI: OEM2 (v001 UNISYS OEM2 0x06040000 LTP 0x06040000) @
0x00000000026d5140
(XEN) ACPI: WSPT (v001 UNISYS WSPT 0x06040000 LTP 0x06040000) @
0x00000000026d5d3c
(XEN) ACPI: SLIT (v001 UNISYS SLIT 0x06040000 LTP 0x06040000) @
0x00000000026d5d64
(XEN) ACPI: SRAT (v001 UNISYS SRAT 0x06040000 LTP 0x06040000) @
0x00000000026d5d94
(XEN) ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x06040000) @
0x00000000026d5e94
(XEN) ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @
0x00000000026d5fb0
(XEN) ACPI: DSDT (v001 Intel 870 SMP 0x06040000 MSFT 0x02000002) @
0x0000000000000000
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: OEM1 (v001 UNISYS OEM1 0x06040000 LTP 0x06040000) @
0x00000000026d5110
(XEN) ACPI: DSDT (v001 Intel 870 SMP 0x06040000 MSFT 0x02000002) @
0x0000000000000000
(XEN) Switched to APIC driver `es7000'.
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
(XEN) Processor #16 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x16] enabled)
(XEN) Processor #22 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x18] enabled)
(XEN) Processor #24 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x1e] enabled)
(XEN) Processor #30 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] enabled)
(XEN) Processor #18 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
(XEN) Processor #20 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x1a] enabled)
(XEN) Processor #26 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x1c] enabled)
(XEN) Processor #28 15:4 APIC version 20
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x10] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 16, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: IOAPIC (id[0x18] address[0xfec02000] gsi_base[24])
(XEN) IOAPIC[1]: apic_id 24, version 32, address 0xfec02000, GSI 24-47
(XEN) ACPI: IOAPIC (id[0x19] address[0xfec03000] gsi_base[48])
(XEN) IOAPIC[2]: apic_id 25, version 32, address 0xfec03000, GSI 48-71
(XEN) ACPI: IOAPIC (id[0x1a] address[0xfec04000] gsi_base[72])
(XEN) IOAPIC[3]: apic_id 26, version 32, address 0xfec04000, GSI 72-95
(XEN) ACPI: IOAPIC (id[0x1b] address[0xfec05000] gsi_base[96])
(XEN) IOAPIC[4]: apic_id 27, version 32, address 0xfec05000, GSI 96-119
(XEN) ACPI: IOAPIC (id[0x1c] address[0xfec06000] gsi_base[120])
(XEN) IOAPIC[5]: apic_id 28, version 32, address 0xfec06000, GSI 120-143
(XEN) ACPI: IOAPIC (id[0x1d] address[0xfec07000] gsi_base[144])
(XEN) IOAPIC[6]: apic_id 29, version 32, address 0xfec07000, GSI 144-167
(XEN) ACPI: IOAPIC (id[0x1e] address[0xfec08000] gsi_base[168])
(XEN) IOAPIC[7]: apic_id 30, version 32, address 0xfec08000, GSI 168-191
(XEN) ACPI: IOAPIC (id[0x1f] address[0xfec09000] gsi_base[192])
(XEN) IOAPIC[8]: apic_id 31, version 32, address 0xfec09000, GSI 192-215
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Physical Cluster. Using 9 I/O APICs, target
cpus 1
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) mapped APIC to ffff828bfffff000 (fee00000)
(XEN) mapped IOAPIC to ffff828bffffe000 (fec00000)
(XEN) mapped IOAPIC to ffff828bffffd000 (fec02000)
(XEN) mapped IOAPIC to ffff828bffffc000 (fec03000)
(XEN) mapped IOAPIC to ffff828bffffb000 (fec04000)
(XEN) mapped IOAPIC to ffff828bffffa000 (fec05000)
(XEN) mapped IOAPIC to ffff828bffff9000 (fec06000)
(XEN) mapped IOAPIC to ffff828bffff8000 (fec07000)
(XEN) mapped IOAPIC to ffff828bffff7000 (fec08000)
(XEN) mapped IOAPIC to ffff828bffff6000 (fec09000)
(XEN) Initializing CPU#0
(XEN) Detected 3000.108 MHz processor.
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 4
(XEN) CPU: Processor Core ID: 0
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU0: Thermal monitoring enabled
(XEN) CPU0: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Getting VERSION: 50014
(XEN) Getting VERSION: 50014
(XEN) Getting ID: 10000000
(XEN) Getting LVT0: 10700
(XEN) Getting LVT1: 10400
(XEN) ES7000: Enabling APIC mode.
(XEN) masked ExtINT on CPU#0
(XEN) Leaving ESR disabled.
(XEN) Booting processor 1/22 eip 90000
(XEN) Initializing CPU#1
(XEN) masked ExtINT on CPU#1
(XEN) Leaving ESR disabled.
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 5
(XEN) CPU: Processor Core ID: 1
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#1.
(XEN) CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU1: Thermal monitoring enabled
(XEN) CPU1: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 2/24 eip 90000
(XEN) Initializing CPU#2
(XEN) masked ExtINT on CPU#2
(XEN) Leaving ESR disabled.
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 6
(XEN) CPU: Processor Core ID: 0
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#2.
(XEN) CPU2: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU2: Thermal monitoring enabled
(XEN) CPU2: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 3/30 eip 90000
(XEN) Initializing CPU#3
(XEN) masked ExtINT on CPU#3
(XEN) Leaving ESR disabled.
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 7
(XEN) CPU: Processor Core ID: 1
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#3.
(XEN) CPU3: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU3: Thermal monitoring enabled
(XEN) CPU3: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 4/18 eip 90000
(XEN) Initializing CPU#4
(XEN) masked ExtINT on CPU#4
(XEN) Leaving ESR disabled.
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 4
(XEN) CPU: Processor Core ID: 1
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#4.
(XEN) CPU4: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU4: Thermal monitoring enabled
(XEN) CPU4: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 5/20 eip 90000
(XEN) Initializing CPU#5
(XEN) masked ExtINT on CPU#5
(XEN) Leaving ESR disabled.
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 5
(XEN) CPU: Processor Core ID: 0
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#5.
(XEN) CPU5: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU5: Thermal monitoring enabled
(XEN) CPU5: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 6/26 eip 90000
(XEN) Initializing CPU#6
(XEN) masked ExtINT on CPU#6
(XEN) Leaving ESR disabled.
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 6
(XEN) CPU: Processor Core ID: 1
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#6.
(XEN) CPU6: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU6: Thermal monitoring enabled
(XEN) CPU6: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Booting processor 7/28 eip 90000
(XEN) Initializing CPU#7
(XEN) masked ExtINT on CPU#7
(XEN) Leaving ESR disabled.
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 7
(XEN) CPU: Processor Core ID: 0
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#7.
(XEN) CPU7: Intel P4/Xeon Extended MCE MSRs (24) available
(XEN) CPU7: Thermal monitoring enabled
(XEN) CPU7: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
(XEN) Total of 8 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) init IO_APIC IRQs
(XEN) IO-APIC (apicid-pin) 16-0, 16-16, 16-17, 16-18, 16-19, 16-20,
16-21, 16-22, 16-23, 24-0, 24-1, 24-2, 24-3, 24-4, 24-5, 24-6, 24-7,
24-8, 24-9, 24-10, 24-11, 24-12, 24-13, 24-14, 24-15, 24-16, 24-17,
24-18, 24-19, 24-20, 24-21, 24-22, 24-23, 25-0, 25-1, 25-2, 25-3, 25-4,
25-5, 25-6, 25-7, 25-8, 25-9, 25-10, 25-11, 25-12, 25-13, 25-14, 25-15,
25-16, 25-17, 25-18, 25-19, 25-20, 25-21, 25-22, 25-23, 26-0, 26-1,
26-2, 26-3, 26-4, 26-5, 26-6, 26-7, 26-8, 26-9, 26-10, 26-11, 26-12,
26-13, 26-14, 26-15, 26-16, 26-17, 26-18, 26-19, 26-20, 26-21, 26-22,
26-23, 27-0, 27-1, 27-2, 27-3, 27-4, 27-5, 27-6, 27-7, 27-8, 27-9,
27-10, 27-11, 27-12, 27-13, 27-14, 27-15, 27-16, 27-17, 27-18, 27-19,
27-20, 27-21, 27-22, 27-23, 28-0, 28-1, 28-2, 28-3, 28-4, 28-5, 28-6,
28-7, 28-8, 28-9, 28-10, 28-11, 28-12, 28-13, 28-14, 28-15, 28-16,
28-17, 28-18, 28-19, 28-20, 28-21, 28-22, 28-23, 29-0, 29-1, 29-2, 29-3,
29-4, 29-5, 29-6, 29-7, 29-8, 29-9, 29-10, 29-11, 29-12, 29-13, 29-14,
29-15, 29-16, 29-17, 29-18, 29-19, 29-20, 29-21, 29-22, 29-23, 30-0,
30-1, 30-2, 30-3, 30-4, 30-5, 30-6, 30-7, 30-8, 30-9, 30-10, 30-11,
30-12, 30-13, 30-14, 30-15, 30-16, 30-17, 30-18, 30-19, 30-20, 30-21,
30-22, 30-23, 31-0, 31-1, 31-2, 31-3, 31-4, 31-5, 31-6, 31-7, 31-8,
31-9, 31-10, 31-11, 31-12, 31-13, 31-14, 31-15, 31-16, 31-17, 31-18,
31-19, 31-20, 31-21, 31-22, 31-23 not connected.
(XEN) ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
(XEN) number of MP IRQ sources: 15.
(XEN) number of IO-APIC #16 registers: 24.
(XEN) number of IO-APIC #24 registers: 24.
(XEN) number of IO-APIC #25 registers: 24.
(XEN) number of IO-APIC #26 registers: 24.
(XEN) number of IO-APIC #27 registers: 24.
(XEN) number of IO-APIC #28 registers: 24.
(XEN) number of IO-APIC #29 registers: 24.
(XEN) number of IO-APIC #30 registers: 24.
(XEN) number of IO-APIC #31 registers: 24.
(XEN) testing the IO APIC.......................
(XEN) IO APIC #16......
(XEN) .... register #00: 00000000
(XEN) ....... : physical APIC id: 00
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0020
(XEN) .... register #02: 00000000
(XEN) ....... : arbitration: 00
(XEN) .... register #03: 00000001
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 010 00 0 0 0 0 0 0 0 39
(XEN) 02 010 00 0 0 0 0 0 0 0 31
(XEN) 03 010 00 0 0 0 0 0 0 0 41
(XEN) 04 010 00 0 0 0 0 0 0 0 49
(XEN) 05 010 00 0 0 0 0 0 0 0 51
(XEN) 06 010 00 0 0 0 0 0 0 0 59
(XEN) 07 010 00 0 0 0 0 0 0 0 61
(XEN) 08 010 00 0 0 0 0 0 0 0 69
(XEN) 09 010 00 1 1 0 0 0 0 0 71
(XEN) 0a 010 00 0 0 0 0 0 0 0 79
(XEN) 0b 010 00 0 0 0 0 0 0 0 81
(XEN) 0c 010 00 0 0 0 0 0 0 0 89
(XEN) 0d 010 00 0 0 0 0 0 0 0 91
(XEN) 0e 010 00 0 0 0 0 0 0 0 99
(XEN) 0f 010 00 0 0 0 0 0 0 0 A1
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) IO APIC #24......
(XEN) .... register #00: 00000000
(XEN) ....... : physical APIC id: 00
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0020
(XEN) .... register #02: 00000000
(XEN) ....... : arbitration: 00
(XEN) .... register #03: 00000001
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
(XEN) 04 000 00 1 0 0 0 0 0 0 00
(XEN) 05 000 00 1 0 0 0 0 0 0 00
(XEN) 06 000 00 1 0 0 0 0 0 0 00
(XEN) 07 000 00 1 0 0 0 0 0 0 00
(XEN) 08 000 00 1 0 0 0 0 0 0 00
(XEN) 09 000 00 1 0 0 0 0 0 0 00
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
(XEN) 0b 000 00 1 0 0 0 0 0 0 00
(XEN) 0c 000 00 1 0 0 0 0 0 0 00
(XEN) 0d 000 00 1 0 0 0 0 0 0 00
(XEN) 0e 000 00 1 0 0 0 0 0 0 00
(XEN) 0f 000 00 1 0 0 0 0 0 0 00
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) IO APIC #25......
(XEN) .... register #00: 00000000
(XEN) ....... : physical APIC id: 00
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0020
(XEN) .... register #02: 00000000
(XEN) ....... : arbitration: 00
(XEN) .... register #03: 00000001
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
(XEN) 04 000 00 1 0 0 0 0 0 0 00
(XEN) 05 000 00 1 0 0 0 0 0 0 00
(XEN) 06 000 00 1 0 0 0 0 0 0 00
(XEN) 07 000 00 1 0 0 0 0 0 0 00
(XEN) 08 000 00 1 0 0 0 0 0 0 00
(XEN) 09 000 00 1 0 0 0 0 0 0 00
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
(XEN) 0b 000 00 1 0 0 0 0 0 0 00
(XEN) 0c 000 00 1 0 0 0 0 0 0 00
(XEN) 0d 000 00 1 0 0 0 0 0 0 00
(XEN) 0e 000 00 1 0 0 0 0 0 0 00
(XEN) 0f 000 00 1 0 0 0 0 0 0 00
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) IO APIC #26......
(XEN) .... register #00: 00000000
(XEN) ....... : physical APIC id: 00
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0020
(XEN) .... register #02: 00000000
(XEN) ....... : arbitration: 00
(XEN) .... register #03: 00000001
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
(XEN) 04 000 00 1 0 0 0 0 0 0 00
(XEN) 05 000 00 1 0 0 0 0 0 0 00
(XEN) 06 000 00 1 0 0 0 0 0 0 00
(XEN) 07 000 00 1 0 0 0 0 0 0 00
(XEN) 08 000 00 1 0 0 0 0 0 0 00
(XEN) 09 000 00 1 0 0 0 0 0 0 00
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
(XEN) 0b 000 00 1 0 0 0 0 0 0 00
(XEN) 0c 000 00 1 0 0 0 0 0 0 00
(XEN) 0d 000 00 1 0 0 0 0 0 0 00
(XEN) 0e 000 00 1 0 0 0 0 0 0 00
(XEN) 0f 000 00 1 0 0 0 0 0 0 00
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) IO APIC #27......
(XEN) .... register #00: 00000000
(XEN) ....... : physical APIC id: 00
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0020
(XEN) .... register #02: 00000000
(XEN) ....... : arbitration: 00
(XEN) .... register #03: 00000001
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
(XEN) 04 000 00 1 0 0 0 0 0 0 00
(XEN) 05 000 00 1 0 0 0 0 0 0 00
(XEN) 06 000 00 1 0 0 0 0 0 0 00
(XEN) 07 000 00 1 0 0 0 0 0 0 00
(XEN) 08 000 00 1 0 0 0 0 0 0 00
(XEN) 09 000 00 1 0 0 0 0 0 0 00
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
(XEN) 0b 000 00 1 0 0 0 0 0 0 00
(XEN) 0c 000 00 1 0 0 0 0 0 0 00
(XEN) 0d 000 00 1 0 0 0 0 0 0 00
(XEN) 0e 000 00 1 0 0 0 0 0 0 00
(XEN) 0f 000 00 1 0 0 0 0 0 0 00
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) IO APIC #28......
(XEN) .... register #00: 00000000
(XEN) ....... : physical APIC id: 00
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0020
(XEN) .... register #02: 00000000
(XEN) ....... : arbitration: 00
(XEN) .... register #03: 00000001
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
(XEN) 04 000 00 1 0 0 0 0 0 0 00
(XEN) 05 000 00 1 0 0 0 0 0 0 00
(XEN) 06 000 00 1 0 0 0 0 0 0 00
(XEN) 07 000 00 1 0 0 0 0 0 0 00
(XEN) 08 000 00 1 0 0 0 0 0 0 00
(XEN) 09 000 00 1 0 0 0 0 0 0 00
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
(XEN) 0b 000 00 1 0 0 0 0 0 0 00
(XEN) 0c 000 00 1 0 0 0 0 0 0 00
(XEN) 0d 000 00 1 0 0 0 0 0 0 00
(XEN) 0e 000 00 1 0 0 0 0 0 0 00
(XEN) 0f 000 00 1 0 0 0 0 0 0 00
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) IO APIC #29......
(XEN) .... register #00: 00000000
(XEN) ....... : physical APIC id: 00
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0020
(XEN) .... register #02: 00000000
(XEN) ....... : arbitration: 00
(XEN) .... register #03: 00000001
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
(XEN) 04 000 00 1 0 0 0 0 0 0 00
(XEN) 05 000 00 1 0 0 0 0 0 0 00
(XEN) 06 000 00 1 0 0 0 0 0 0 00
(XEN) 07 000 00 1 0 0 0 0 0 0 00
(XEN) 08 000 00 1 0 0 0 0 0 0 00
(XEN) 09 000 00 1 0 0 0 0 0 0 00
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
(XEN) 0b 000 00 1 0 0 0 0 0 0 00
(XEN) 0c 000 00 1 0 0 0 0 0 0 00
(XEN) 0d 000 00 1 0 0 0 0 0 0 00
(XEN) 0e 000 00 1 0 0 0 0 0 0 00
(XEN) 0f 000 00 1 0 0 0 0 0 0 00
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) IO APIC #30......
(XEN) .... register #00: 00000000
(XEN) ....... : physical APIC id: 00
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0020
(XEN) .... register #02: 00000000
(XEN) ....... : arbitration: 00
(XEN) .... register #03: 00000001
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
(XEN) 04 000 00 1 0 0 0 0 0 0 00
(XEN) 05 000 00 1 0 0 0 0 0 0 00
(XEN) 06 000 00 1 0 0 0 0 0 0 00
(XEN) 07 000 00 1 0 0 0 0 0 0 00
(XEN) 08 000 00 1 0 0 0 0 0 0 00
(XEN) 09 000 00 1 0 0 0 0 0 0 00
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
(XEN) 0b 000 00 1 0 0 0 0 0 0 00
(XEN) 0c 000 00 1 0 0 0 0 0 0 00
(XEN) 0d 000 00 1 0 0 0 0 0 0 00
(XEN) 0e 000 00 1 0 0 0 0 0 0 00
(XEN) 0f 000 00 1 0 0 0 0 0 0 00
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) IO APIC #31......
(XEN) .... register #00: 00000000
(XEN) ....... : physical APIC id: 00
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0020
(XEN) .... register #02: 00000000
(XEN) ....... : arbitration: 00
(XEN) .... register #03: 00000001
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
(XEN) 04 000 00 1 0 0 0 0 0 0 00
(XEN) 05 000 00 1 0 0 0 0 0 0 00
(XEN) 06 000 00 1 0 0 0 0 0 0 00
(XEN) 07 000 00 1 0 0 0 0 0 0 00
(XEN) 08 000 00 1 0 0 0 0 0 0 00
(XEN) 09 000 00 1 0 0 0 0 0 0 00
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
(XEN) 0b 000 00 1 0 0 0 0 0 0 00
(XEN) 0c 000 00 1 0 0 0 0 0 0 00
(XEN) 0d 000 00 1 0 0 0 0 0 0 00
(XEN) 0e 000 00 1 0 0 0 0 0 0 00
(XEN) 0f 000 00 1 0 0 0 0 0 0 00
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) Using vector-based indexing
(XEN) IRQ to pin mappings:
(XEN) IRQ49 -> 0:2
(XEN) IRQ57 -> 0:1
(XEN) IRQ65 -> 0:3
(XEN) IRQ73 -> 0:4
(XEN) IRQ81 -> 0:5
(XEN) IRQ89 -> 0:6
(XEN) IRQ97 -> 0:7
(XEN) IRQ105 -> 0:8
(XEN) IRQ113 -> 0:9
(XEN) IRQ121 -> 0:10
(XEN) IRQ129 -> 0:11
(XEN) IRQ137 -> 0:12
(XEN) IRQ145 -> 0:13
(XEN) IRQ153 -> 0:14
(XEN) IRQ161 -> 0:15
(XEN) .................................... done.
(XEN) Using local APIC timer interrupts.
(XEN) calibrating APIC timer ...
(XEN) ..... CPU clock speed is 3000.1347 MHz.
(XEN) ..... host bus clock speed is 166.6740 MHz.
(XEN) ..... bus_scale = 0x0000AAB1
(XEN) checking TSC synchronization across 8 CPUs:
(XEN) CPU#0 had -6 usecs TSC skew, fixed it up.
(XEN) CPU#5 had 3 usecs TSC skew, fixed it up.
(XEN) Platform timer is 1.193MHz PIT
(XEN) Brought up 8 CPUs
(XEN) Machine check exception polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Domain 0 kernel supports features = { 0000000f }.
(XEN) Domain 0 kernel requires features = { 00000000 }.
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000017000000->0000000018000000 (126976 pages
to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff80100000->ffffffff8068e086
(XEN) Init. ramdisk: ffffffff8068f000->ffffffff8068f000
(XEN) Phys-Mach map: ffffffff8068f000->ffffffff8078f000
(XEN) Start info: ffffffff8078f000->ffffffff80790000
(XEN) Page tables: ffffffff80790000->ffffffff80799000
(XEN) Boot stack: ffffffff80799000->ffffffff8079a000
(XEN) TOTAL: ffffffff80000000->ffffffff80c00000
(XEN) ENTRY ADDRESS: ffffffff80100000
(XEN) Dom0 has maximum 8 VCPUs
(XEN) Scrubbing Free RAM:
........................................................................
........................................................................
........................................................................
........................................................................
...........................................done.
(XEN) Xen trace buffers: disabled
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
input to Xen).
kernel direct mapping tables up to 20800000 @ 799000-799000
Bootdata ok (command line is root=/dev/sda1 selinux=0 resume=/dev/sda2
splash=silent showopts)
Linux version 2.6.16-xen0 (root@m0075) (gcc version 3.3.3 (SuSE Linux))
#1 Wed Mar 29 00:20:11 EST 2006
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x18] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x1e] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x1a] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x1c] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x10] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 16, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x18] address[0xfec02000] gsi_base[24])
IOAPIC[1]: apic_id 24, version 32, address 0xfec02000, GSI 24-47
ACPI: IOAPIC (id[0x19] address[0xfec03000] gsi_base[48])
IOAPIC[2]: apic_id 25, version 32, address 0xfec03000, GSI 48-71
ACPI: IOAPIC (id[0x1a] address[0xfec04000] gsi_base[72])
IOAPIC[3]: apic_id 26, version 32, address 0xfec04000, GSI 72-95
ACPI: IOAPIC (id[0x1b] address[0xfec05000] gsi_base[96])
IOAPIC[4]: apic_id 27, version 32, address 0xfec05000, GSI 96-119
ACPI: IOAPIC (id[0x1c] address[0xfec06000] gsi_base[120])
IOAPIC[5]: apic_id 28, version 32, address 0xfec06000, GSI 120-143
ACPI: IOAPIC (id[0x1d] address[0xfec07000] gsi_base[144])
IOAPIC[6]: apic_id 29, version 32, address 0xfec07000, GSI 144-167
ACPI: IOAPIC (id[0x1e] address[0xfec08000] gsi_base[168])
IOAPIC[7]: apic_id 30, version 32, address 0xfec08000, GSI 168-191
ACPI: IOAPIC (id[0x1f] address[0xfec09000] gsi_base[192])
IOAPIC[8]: apic_id 31, version 32, address 0xfec09000, GSI 192-215
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Setting APIC routing to xen
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at e9000000 (gap: e8000000:10000000)
Built 1 zonelists
Kernel command line: root=/dev/sda1 selinux=0 resume=/dev/sda2
splash=silent showopts
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
Xen reported: 2999.986 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Software IO TLB enabled:
Aperture: 64 megabytes
Bus range: 0x000000001c000000 - 0x0000000020000000
Kernel range: 0xffff8800019cc000 - 0xffff8800059cc000
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Memory: 440576k/532480k available (3515k kernel code, 91240k reserved,
1376k data, 304k init)
Calibrating delay using timer specific routine.. 6003.76 BogoMIPS
(lpj=30018831)
Mount-cache hash table entries: 256
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Genuine Intel(R) CPU 3.00GHz stepping 08
DMI present.
Grant table initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: Device [MBDV] status [00000008]: functional but not present;
setting present
ACPI: PCI Root Bridge [MBDV] (0000:ff)
ACPI: PCI Root Bridge [S1H0] (0000:00)
PCI quirk: region 0d00-0d7f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0e80-0ebf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 11 14 15) *12
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 11 14 15) *12
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *6 10 11 14 15)
ACPI: PCI Root Bridge [S1H1] (0000:02)
PCI: Enable I/O Space to 1 KB Granularity
PCI: Enable I/O Space to 1 KB Granularity
ACPI: PCI Root Bridge [S1H2] (0000:09)
PCI: Enable I/O Space to 1 KB Granularity
PCI: Enable I/O Space to 1 KB Granularity
ACPI: PCI Root Bridge [S1H3] (0000:10)
PCI: Enable I/O Space to 1 KB Granularity
PCI: Enable I/O Space to 1 KB Granularity
ACPI: PCI Root Bridge [S1H4] (0000:17)
PCI: Enable I/O Space to 1 KB Granularity
PCI: Enable I/O Space to 1 KB Granularity
ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
xen_mem: Initialising balloon driver.
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
PCI: Bridge: 0000:00:1e.0
IO window: 1000-1fff
MEM window: f6000000-f7efffff
PREFETCH window: e9000000-e90fffff
PCI: Bridge: 0000:02:1d.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:02:1f.0
IO window: 2000-23ff
MEM window: f4f00000-f4ffffff
PREFETCH window: f3f00000-f3ffffff
PCI: Bridge: 0000:09:1d.0
IO window: 2800-2bff
MEM window: f2f00000-f2ffffff
PREFETCH window: disabled.
PCI: Failed to allocate mem resource #6:100000@f2000000 for 0000:0d:01.1
PCI: Bridge: 0000:09:1f.0
IO window: 2c00-2fff
MEM window: f2d00000-f2efffff
PREFETCH window: f1e00000-f1ffffff
PCI: Bridge: 0000:10:1d.0
IO window: 3000-33ff
MEM window: f0e00000-f0ffffff
PREFETCH window: efe00000-efffffff
PCI: Bridge: 0000:10:1f.0
IO window: 3400-37ff
MEM window: f0c00000-f0dfffff
PREFETCH window: efc00000-efdfffff
PCI: Bridge: 0000:17:1d.0
IO window: 3800-3bff
MEM window: eee00000-eeffffff
PREFETCH window: ede00000-edffffff
PCI: Bridge: 0000:17:1f.0
IO window: 3c00-3fff
MEM window: eec00000-eedfffff
PREFETCH window: edc00000-eddfffff
IA-32 Microcode Update Driver: v1.14-xen <tigran@xxxxxxxxxxx>
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Real Time Clock Driver v1.12ac
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
isa bounce pool size: 16 pages
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
HP CISS Driver (v 2.6.10)
Intel(R) PRO/1000 Network Driver - version 6.3.9-k4
Copyright (c) 1999-2005 Intel Corporation.
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:0a:01.0[A] -> GSI 72 (level, low) -> IRQ 16
e1000: 0000:0a:01.0: e1000_probe: (PCI-X:133MHz:64-bit)
08:00:0b:1e:1a:2c
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
GSI 17 sharing vector 0xB1 and IRQ 17
ACPI: PCI Interrupt 0000:0a:01.1[B] -> GSI 73 (level, low) -> IRQ 17
e1000: 0000:0a:01.1: e1000_probe: (PCI-X:133MHz:64-bit)
08:00:0b:1e:1a:2d
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
pcnet32.c:v1.31c 01.Nov.2005 tsbogend@xxxxxxxxxxxxxxxx
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
Xen virtual console successfully installed as ttyS0
Event-channel device installed.
blkif_init: reqs=64, pages=704, mmap_vstart=0xffff88001f000000
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
GSI 18 sharing vector 0xB9 and IRQ 18
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ICH4: chipset revision 2
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x0880-0x0887, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x0888-0x088f, BIOS settings: hdc:pio, hdd:pio
hda: TOSHIBA CD/DVDW SD-R6472, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Adaptec aacraid driver (1.1-4 Mar 29 2006 00:20:00)
3ware Storage Controller device driver for Linux v1.26.02.001.
Fusion MPT base driver 3.03.07
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SPI Host driver 3.03.07
GSI 19 sharing vector 0xC1 and IRQ 19
ACPI: PCI Interrupt 0000:0d:01.0[A] -> GSI 96 (level, low) -> IRQ 19
mptbase: Initiating ioc0 bringup
ioc0: 53C1030: Capabilities={Initiator,Target}
scsi0 : ioc0: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=19
Vendor: UNISYS Model: 007114ST39102LC Rev: B603
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 17916935 512-byte hdwr sectors (9173 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write through w/ FUA
SCSI device sda: 17916935 512-byte hdwr sectors (9173 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write through w/ FUA
sda: sda1 sda2
sd 0:0:8:0: Attached scsi disk sda
Vendor: UNISYS Model: 007114ST39102LC Rev: B603
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdb: 17916935 512-byte hdwr sectors (9173 MB)
sdb: Write Protect is off
SCSI device sdb: drive cache: write back w/ FUA
SCSI device sdb: 17916935 512-byte hdwr sectors (9173 MB)
sdb: Write Protect is off
SCSI device sdb: drive cache: write back w/ FUA
sdb: sdb1
sd 0:0:9:0: Attached scsi disk sdb
Vendor: UNISYS Model: 018275MAG3182MC Rev: 0602
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdc: 35694860 512-byte hdwr sectors (18276 MB)
sdc: Write Protect is off
SCSI device sdc: drive cache: write through w/ FUA
SCSI device sdc: 35694860 512-byte hdwr sectors (18276 MB)
sdc: Write Protect is off
SCSI device sdc: drive cache: write through w/ FUA
sdc: sdc1
sd 0:0:10:0: Attached scsi disk sdc
GSI 20 sharing vector 0xC9 and IRQ 20
ACPI: PCI Interrupt 0000:0d:01.1[B] -> GSI 97 (level, low) -> IRQ 20
mptbase: Initiating ioc1 bringup
ioc1: 53C1030: Capabilities={Initiator,Target}
scsi1 : ioc1: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=20
usbmon: debugfs is not available
USB Universal Host Controller Interface driver v2.3
GSI 21 sharing vector 0xD1 and IRQ 21
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 21, io base 0x00000800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
GSI 22 sharing vector 0xD9 and IRQ 22
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 22, io base 0x00000820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00000840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 2-1: new full speed USB device using uhci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
usb 3-1: new low speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
input: Unisys Corporation as /class/input/input0
input: USB HID v1.01 Keyboard [Unisys Corporation] on usb-0000:00:1d.1-1
input: Unisys Corporation as /class/input/input1
input: USB HID v1.01 Mouse [Unisys Corporation] on usb-0000:00:1d.1-1
input: ATEN ATEN Composite as /class/input/input2
input: USB HID v1.10 Keyboard [ATEN ATEN Composite] on
usb-0000:00:1d.2-1
input: ATEN ATEN Composite as /class/input/input3
input: USB HID v1.10 Mouse [ATEN ATEN Composite] on usb-0000:00:1d.2-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: multipath personality registered for level -4
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@xxxxxxxxxx
device-mapper: dm-multipath version 1.0.4 loaded
device-mapper: dm-round-robin version 1.0.0 loaded
device-mapper: dm-emc version 0.0.3 loaded
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Bridge firewalling registered
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
ReiserFS: sda1: found reiserfs format "3.6" with standard journal
ReiserFS: sda1: using ordered data mode
ReiserFS: sda1: journal params: device sda1, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: sda1: checking transaction log (sda1)
ReiserFS: sda1: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem).
Adding 2104504k swap on /dev/sda2. Priority:42 extents:1
across:2104504k
ReiserFS: sda1: warning: acl not supported.
ReiserFS: sda1: warning: user_xattr not supported.
ReiserFS: sda1: warning: acl not supported.
ReiserFS: sda1: warning: user_xattr not supported.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT3 (no)acl options not supported
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
EXT3 (no)acl options not supported
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdc1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
device vif0.0 entered promiscuous mode
xenbr0: port 1(vif0.0) entering learning state
xenbr0: topology change detected, propagating
xenbr0: port 1(vif0.0) entering forwarding state
e1000: peth0: e1000_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex
device peth0 entered promiscuous mode
xenbr0: port 2(peth0) entering learning state
xenbr0: topology change detected, propagating
xenbr0: port 2(peth0) entering forwarding state
(XEN) microcode: No new microcode data for CPU6
(XEN) microcode: No new microcode data for CPU3
(XEN) microcode: No new microcode data for CPU7
(XEN) microcode: No new microcode data for CPU1
(XEN) microcode: No new microcode data for CPU2
(XEN) microcode: No new microcode data for CPU4
(XEN) microcode: No new microcode data for CPU5
(XEN) microcode: No new microcode data for CPU0
ACPI: Power Button (FF) [PWRF]
(XEN) mtrr: type mismatch for f6000000,400000 old: uncachable new:
write-combining
(XEN) mtrr: type mismatch for f6000000,400000 old: uncachable new:
write-combining
(XEN) (GUEST: 5) HVM Loader
(XEN) (GUEST: 5) Loading ROMBIOS ...
(XEN) (GUEST: 5) Loading Cirrus VGABIOS ...
(XEN) (GUEST: 5) Loading VMXAssist ...
(XEN) (GUEST: 5) VMX go ...
(XEN) (GUEST: 5) VMXAssist (Mar 29 2006)
(XEN) (GUEST: 5) Memory size 512 MB
(XEN) (GUEST: 5) E820 map:
(XEN) (GUEST: 5) 0000000000000000 - 000000000009F800 (RAM)
(XEN) (GUEST: 5) 000000000009F800 - 00000000000A0000 (Reserved)
(XEN) (GUEST: 5) 00000000000A0000 - 00000000000C0000 (Type 16)
(XEN) (GUEST: 5) 00000000000F0000 - 0000000000100000 (Reserved)
(XEN) (GUEST: 5) 0000000000100000 - 000000001FFFE000 (RAM)
(XEN) (GUEST: 5) 000000001FFFE000 - 000000001FFFF000 (Type 18)
(XEN) (GUEST: 5) 000000001FFFF000 - 0000000020000000 (Type 17)
(XEN) (GUEST: 5) 0000000020000000 - 0000000020003000 (ACPI NVS)
(XEN) (GUEST: 5) 0000000020003000 - 000000002000D000 (ACPI Data)
(XEN) (GUEST: 5) 00000000FEC00000 - 0000000100000000 (Type 16)
(XEN) (GUEST: 5)
(XEN) (GUEST: 5) Start BIOS ...
(XEN) (GUEST: 5) Starting emulated 16-bit real-mode: ip=F000:FFF0
(XEN) (GUEST: 5) rombios.c,v 1.138 2005/05/07 15:55:26 vruppert Exp $
(XEN) HVM_PIT: guest freq in cycles=150005273
(XEN) (GUEST: 5) Remapping master: ICW2 0x8 -> 0x20
(XEN) (GUEST: 5) Remapping slave: ICW2 0x70 -> 0x28
(XEN) (GUEST: 5) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50
vruppert Exp $ (XEN) (GUEST: 5) HVMAssist BIOS, 1 cpu, $Revision: 1.138
$ $Date: 2005/05/07 15:55:26 $
(XEN) (GUEST: 5)
(XEN) (GUEST: 5) ata0-0: PCHS=16383/16/63 translation=lba
LCHS=1024/255/63
(XEN) (GUEST: 5) ata0 master: QEMU HARDDISK ATA-2 Hard-Disk (8197
MBytes)
(XEN) (GUEST: 5) ata0 slave: Unknown device
(XEN) (GUEST: 5) ata1 master: QEMU CD-ROM ATAPI-4 CD-Rom/DVD-Rom
(XEN) (GUEST: 5) ata1 slave: Unknown device
(XEN) (GUEST: 5)
(XEN) (GUEST: 5) Booting from Hard Disk...
(XEN) (GUEST: 5) unsupported PCI BIOS function 0x0E
(XEN) (GUEST: 5) int13_harddisk: function 15, unmapped device for
ELDL=81
(XEN) HVM_PIT: guest freq in cycles=30044302
(XEN) (GUEST: 6) HVM Loader
(XEN) (GUEST: 6) Loading ROMBIOS ...
(XEN) (GUEST: 6) Loading Cirrus VGABIOS ...
(XEN) (GUEST: 6) Loading VMXAssist ...
(XEN) (GUEST: 6) VMX go ...
(XEN) (GUEST: 6) VMXAssist (Mar 29 2006)
(XEN) (GUEST: 6) Memory size 512 MB
(XEN) (GUEST: 6) E820 map:
(XEN) (GUEST: 6) 0000000000000000 - 000000000009F800 (RAM)
(XEN) (GUEST: 6) 000000000009F800 - 00000000000A0000 (Reserved)
(XEN) (GUEST: 6) 00000000000A0000 - 00000000000C0000 (Type 16)
(XEN) (GUEST: 6) 00000000000F0000 - 0000000000100000 (Reserved)
(XEN) (GUEST: 6) 0000000000100000 - 000000001FFFE000 (RAM)
(XEN) (GUEST: 6) 000000001FFFE000 - 000000001FFFF000 (Type 18)
(XEN) (GUEST: 6) 000000001FFFF000 - 0000000020000000 (Type 17)
(XEN) (GUEST: 6) 0000000020000000 - 0000000020003000 (ACPI NVS)
(XEN) (GUEST: 6) 0000000020003000 - 000000002000D000 (ACPI Data)
(XEN) (GUEST: 6) 00000000FEC00000 - 0000000100000000 (Type 16)
(XEN) (GUEST: 6)
(XEN) (GUEST: 6) Start BIOS ...
(XEN) (GUEST: 6) Starting emulated 16-bit real-mode: ip=F000:FFF0
(XEN) (GUEST: 6) rombios.c,v 1.138 2005/05/07 15:55:26 vruppert Exp $
(XEN) HVM_PIT: guest freq in cycles=150005273
(XEN) (GUEST: 6) Remapping master: ICW2 0x8 -> 0x20
(XEN) (GUEST: 6) Remapping slave: ICW2 0x70 -> 0x28
(XEN) (GUEST: 6) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50
vruppert Exp $ (XEN) (GUEST: 6) HVMAssist BIOS, 1 cpu, $Revision: 1.138
$ $Date: 2005/05/07 15:55:26 $
(XEN) (GUEST: 6)
(XEN) (GUEST: 6) ata0-0: PCHS=16383/16/63 translation=lba
LCHS=1024/255/63
(XEN) (GUEST: 6) ata0 master: QEMU HARDDISK ATA-2 Hard-Disk (8197
MBytes)
(XEN) (GUEST: 6) ata0 slave: Unknown device
(XEN) (GUEST: 6) ata1 master: QEMU CD-ROM ATAPI-4 CD-Rom/DVD-Rom
(XEN) (GUEST: 6) ata1 slave: Unknown device
(XEN) (GUEST: 6)
(XEN) (GUEST: 6) Booting from Hard Disk...
(XEN) ----[ Xen-3.0-unstable Not tainted ]----
(XEN) CPU: 6
(XEN) RIP: e010:[<ffff830000133a1e>] free_shadow_page+0x6e/0x8c0
(XEN) RFLAGS: 0000000000010246 CONTEXT: hypervisor
(XEN) rax: 0000000000000000 rbx: 00000000000064d4 rcx:
00000000808064d4
(XEN) rdx: ffff828400000000 rsi: 0000000000017c26 rdi:
0000000000017c26
(XEN) rbp: 00000000000064d4 rsp: ffff830000fe1dc8 r8:
00000000a0000004
(XEN) r9: 0000000000000000 r10: 0000000000000000 r11:
0000000000000000
(XEN) r12: 0000000000017c26 r13: 0000000000000000 r14:
0000000000000558
(XEN) r15: ffff83000019f480 cr0: 0000000080050033 cr3:
00000000b93fa000
(XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: 0000 cs: e010
(XEN) Xen stack trace from rsp=ffff830000fe1dc8:
(XEN) ffff8300002c5080 0000000000800227 00000000000244d8
ffff83000013c4c5
(XEN) 0000000000000000 ffff8284003b65f0 0000000000000000
00000000003b65f0
(XEN) 0000000000000000 0000000000017c26 0000000000000000
0000000000000558
(XEN) ffff83000019f480 ffff8300001352e3 ffff830000fa3500
0000003900150ce8
(XEN) ffff8300002c5080 ffff8300002c5080 ffff830000fa6080
0000000000050032
(XEN) 0000000000050032 0000000000000001 0000000000000000
ffff8300001353c0
(XEN) ffff830000fa6080 ffff830000154396 ffff830000fa6080
ffff830000fe1f28
(XEN) ffff830000fa6080 0000000000050032 0000000000000000
ffff83000015522f
(XEN) 000000000000681e ffff8300001b0260 0000000000000003
0000000000000000
(XEN) 0000000000000000 ffff830000155d5f ffff830000fa6080
0000000000060ea4
(XEN) 0000000000060ec4 0000000000000000 0000000000000000
ffff830000156736
(XEN) 0000000000000000 0000000000000000 0000000000000000
0000000000000000
(XEN) 0000000000060ec4 0000000000060ea4 0000000000000000
0000000000000000
(XEN) 0000000000000000 0000000000000000 0000000000050032
0000000000000000
(XEN) 0000000000000008 0000000000060ec0 0000000000007ffa
000000ef00000003
(XEN) 0000000000002c1c 0000000000002000 0000000000033216
00000000000014d0
(XEN) 0000000000000202 0000000000feb800 0000000000fe22f3
0000000000fef000
(XEN) 0000000000fef000 0000000000000006 ffff830000fa6080
(XEN) Xen call trace:
(XEN) [<ffff830000133a1e>] free_shadow_page+0x6e/0x8c0
(XEN) [<ffff83000013c4c5>] shadow_fault_64+0x8a5/0x9b0
(XEN) [<ffff8300001352e3>] free_shadow_pages+0x303/0x3a0
(XEN) [<ffff8300001353c0>] clear_all_shadow_status+0x40/0xd0
(XEN) [<ffff830000154396>] vmx_set_cr0+0x446/0x500
(XEN) [<ffff83000015522f>] vmx_cr_access+0xddf/0xe50
(XEN) [<ffff830000155d5f>] vmx_vmexit_handler+0x58f/0x8e0
(XEN) [<ffff830000156736>] vmx_asm_vmexit_handler+0x26/0x30
(XEN)
(XEN) Pagetable walk from 0000000000000578:
(XEN) L4 = 0000000000000000 ffffffffffffffff
(XEN)
(XEN) ****************************************
(XEN) Panic on CPU 6:
(XEN) CPU6 FATAL PAGE FAULT
(XEN) [error_code=0000]
(XEN) Faulting linear address: 0000000000000578
(XEN) ****************************************
(XEN)
(XEN) Reboot in five seconds...
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home