Abstract the code that accesses control register, and
add a separate subarch implementation for Xen.
Signed-off-by: Ian Pratt <ian.pratt@xxxxxxxxxxxxx>
Signed-off-by: Christian Limpach <Christian.Limpach@xxxxxxxxxxxx>
Signed-off-by: Chris Wright <chrisw@xxxxxxxxxxxx>
---
include/asm-i386/mach-default/mach_system.h | 58 ++++++++++++++++++++++++++++
include/asm-i386/mach-xen/mach_system.h | 53 +++++++++++++++++++++++++
include/asm-i386/system.h | 58 ----------------------------
3 files changed, 111 insertions(+), 58 deletions(-)
--- xen-subarch-2.6.orig/include/asm-i386/mach-default/mach_system.h
+++ xen-subarch-2.6/include/asm-i386/mach-default/mach_system.h
@@ -3,6 +3,64 @@
#define clearsegment(seg)
+/*
+ * Clear and set 'TS' bit respectively
+ */
+#define clts() __asm__ __volatile__ ("clts")
+#define read_cr0() ({ \
+ unsigned int __dummy; \
+ __asm__ __volatile__( \
+ "movl %%cr0,%0\n\t" \
+ :"=r" (__dummy)); \
+ __dummy; \
+})
+#define write_cr0(x) \
+ __asm__ __volatile__("movl %0,%%cr0": :"r" (x));
+
+#define read_cr2() ({ \
+ unsigned int __dummy; \
+ __asm__ __volatile__( \
+ "movl %%cr2,%0\n\t" \
+ :"=r" (__dummy)); \
+ __dummy; \
+})
+#define write_cr2(x) \
+ __asm__ __volatile__("movl %0,%%cr2": :"r" (x));
+
+#define read_cr3() ({ \
+ unsigned int __dummy; \
+ __asm__ ( \
+ "movl %%cr3,%0\n\t" \
+ :"=r" (__dummy)); \
+ __dummy; \
+})
+#define write_cr3(x) \
+ __asm__ __volatile__("movl %0,%%cr3": :"r" (x));
+
+#define read_cr4() ({ \
+ unsigned int __dummy; \
+ __asm__( \
+ "movl %%cr4,%0\n\t" \
+ :"=r" (__dummy)); \
+ __dummy; \
+})
+
+#define read_cr4_safe() ({ \
+ unsigned int __dummy; \
+ /* This could fault if %cr4 does not exist */ \
+ __asm__("1: movl %%cr4, %0 \n" \
+ "2: \n" \
+ ".section __ex_table,\"a\" \n" \
+ ".long 1b,2b \n" \
+ ".previous \n" \
+ : "=r" (__dummy): "0" (0)); \
+ __dummy; \
+})
+
+#define write_cr4(x) \
+ __asm__ __volatile__("movl %0,%%cr4": :"r" (x));
+#define stts() write_cr0(8 | read_cr0())
+
/* interrupt control.. */
#define local_save_flags(x) do { typecheck(unsigned long,x); __asm__
__volatile__("pushfl ; popl %0":"=g" (x): /* no input */); } while (0)
#define local_irq_restore(x) do { typecheck(unsigned long,x); __asm__
__volatile__("pushl %0 ; popfl": /* no output */ :"g" (x):"memory", "cc"); }
while (0)
--- xen-subarch-2.6.orig/include/asm-i386/mach-xen/mach_system.h
+++ xen-subarch-2.6/include/asm-i386/mach-xen/mach_system.h
@@ -13,6 +13,59 @@
#define __vcpu_id 0
#endif
+/*
+ * Clear and set 'TS' bit respectively
+ */
+#define clts() __asm__ __volatile__ ("clts")
+#define read_cr0() ({ \
+ unsigned int __dummy; \
+ __asm__ __volatile__( \
+ "movl %%cr0,%0\n\t" \
+ :"=r" (__dummy)); \
+ __dummy; \
+})
+#define write_cr0(x) \
+ __asm__ __volatile__("movl %0,%%cr0": :"r" (x));
+
+#define read_cr2() \
+ (HYPERVISOR_shared_info->vcpu_info[smp_processor_id()].arch.cr2)
+#define write_cr2(x) \
+ __asm__ __volatile__("movl %0,%%cr2": :"r" (x));
+
+#define read_cr3() ({ \
+ unsigned int __dummy; \
+ __asm__ ( \
+ "movl %%cr3,%0\n\t" \
+ :"=r" (__dummy)); \
+ __dummy; \
+})
+#define write_cr3(x) \
+ __asm__ __volatile__("movl %0,%%cr3": :"r" (x));
+
+#define read_cr4() ({ \
+ unsigned int __dummy; \
+ __asm__( \
+ "movl %%cr4,%0\n\t" \
+ :"=r" (__dummy)); \
+ __dummy; \
+})
+
+#define read_cr4_safe() ({ \
+ unsigned int __dummy; \
+ /* This could fault if %cr4 does not exist */ \
+ __asm__("1: movl %%cr4, %0 \n" \
+ "2: \n" \
+ ".section __ex_table,\"a\" \n" \
+ ".long 1b,2b \n" \
+ ".previous \n" \
+ : "=r" (__dummy): "0" (0)); \
+ __dummy; \
+})
+
+#define write_cr4(x) \
+ __asm__ __volatile__("movl %0,%%cr4": :"r" (x));
+#define stts() write_cr0(8 | read_cr0())
+
/* interrupt control.. */
/*
--- xen-subarch-2.6.orig/include/asm-i386/system.h
+++ xen-subarch-2.6/include/asm-i386/system.h
@@ -83,64 +83,6 @@ __asm__ __volatile__ ("movw %%dx,%1\n\t"
#define savesegment(seg, value) \
asm volatile("mov %%" #seg ",%0":"=rm" (value))
-/*
- * Clear and set 'TS' bit respectively
- */
-#define clts() __asm__ __volatile__ ("clts")
-#define read_cr0() ({ \
- unsigned int __dummy; \
- __asm__ __volatile__( \
- "movl %%cr0,%0\n\t" \
- :"=r" (__dummy)); \
- __dummy; \
-})
-#define write_cr0(x) \
- __asm__ __volatile__("movl %0,%%cr0": :"r" (x));
-
-#define read_cr2() ({ \
- unsigned int __dummy; \
- __asm__ __volatile__( \
- "movl %%cr2,%0\n\t" \
- :"=r" (__dummy)); \
- __dummy; \
-})
-#define write_cr2(x) \
- __asm__ __volatile__("movl %0,%%cr2": :"r" (x));
-
-#define read_cr3() ({ \
- unsigned int __dummy; \
- __asm__ ( \
- "movl %%cr3,%0\n\t" \
- :"=r" (__dummy)); \
- __dummy; \
-})
-#define write_cr3(x) \
- __asm__ __volatile__("movl %0,%%cr3": :"r" (x));
-
-#define read_cr4() ({ \
- unsigned int __dummy; \
- __asm__( \
- "movl %%cr4,%0\n\t" \
- :"=r" (__dummy)); \
- __dummy; \
-})
-
-#define read_cr4_safe() ({ \
- unsigned int __dummy; \
- /* This could fault if %cr4 does not exist */ \
- __asm__("1: movl %%cr4, %0 \n" \
- "2: \n" \
- ".section __ex_table,\"a\" \n" \
- ".long 1b,2b \n" \
- ".previous \n" \
- : "=r" (__dummy): "0" (0)); \
- __dummy; \
-})
-
-#define write_cr4(x) \
- __asm__ __volatile__("movl %0,%%cr4": :"r" (x));
-#define stts() write_cr0(8 | read_cr0())
-
#endif /* __KERNEL__ */
#define wbinvd() \
--
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home