Hi,
I tried the patch you pointed out but still get the same result. I
turned off 'detect_soft_lockups', and get the message below.
The same issue is seen in this post:
http://lists.xensource.com/archives/html/xen-devel/2006-02/msg00024.html
The possible and present maps do seem to be used differently than
by the linux kernel when booting SMP. Booting aside, this may have cpu
hotplug implications as well. Is anyone working on cleaning up the use
of the cpu_possible_map and cpu_present_map?
Thanks,
Ryan
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
----------- [cut here ] --------- [please bite here ] ---------
Kernel BUG at drivers/xen/core/smpboot.c:99
invalid operand: 0000 [1] SMP
CPU 0
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.15-xenU #4
RIP: e030:[<ffffffff8023dc0a>] <ffffffff8023dc0a>{xen_smp_intr_init+122}
RSP: e02b:ffff88000041bea8 EFLAGS: 00010286
RAX: 00000000fffffff0 RBX: 0000000000000001 RCX: ffffffff803dd6a8
RDX: 00000000fffffff0 RSI: 0000000000000101 RDI: ffffffff8037df60
RBP: ffff88000041bec8 R08: 0000000000000000 R09: 0000000000000000
R10: ffff88000041bdc8 R11: 0000000000000000 R12: 0000000000000080
R13: 0000000000000001 R14: 000000000000000f R15: 0000ffffffff8010
FS: 00002aaaaadf96d0(0000) GS:ffffffff803a5800(0000)
knlGS:ffffffff803a5800
CS: e033 DS: 0000 ES: 0000
Process swapper (pid: 1, threadinfo ffff88000041a000, task
ffff8800004194e0)
Stack: 0000000000000001 0000000000000008 0000000000000001
00000000ffffffff
ffff88000041bee8 ffffffff8023df2a 0000000000000008
0000000000000001
ffff88000041bf18 ffffffff80149420
Call Trace:<ffffffff8023df2a>{__cpu_up+16}
<ffffffff80149420>{cpu_up+118}
<ffffffff8010e158>{init+272} <ffffffff8011188a>{child_rip+8}
<ffffffff8010e048>{init+0} <ffffffff80111882>{child_rip+0}
Code: 0f 0b 68 00 3e 2e 80 c2 63 00 49 8d 9e 20 73 38 80 44 89 ea
RIP <ffffffff8023dc0a>{xen_smp_intr_init+122} RSP <ffff88000041bea8>
<0>Kernel panic - not syncing: Attempted to kill init!
On Thu, Feb 02, 2006 at 09:01:53AM +0100, Jan Beulich wrote:
> I would attribute this to the fact that cpu_possible_mask still appears to
> net get set early enough for
> setup_per_cpu_areas() to work properly. A patch (that made things work for
> us, while it might not be the ideal solution)
> was sent to the merge list mid December:
> http://lists.xensource.com/archives/html/xen-merge/2005-12/msg00009.html. Jan
>
> >>> Ryan Grimm <grimm@xxxxxxxxxx> 02.02.06 01:18:30 >>>
> With changeset 8728, I get the following for x86_64, smp on.
>
> passing maxcpus=1 to dom0 makes dom0 boot fine
> x86_32 w/ smp boots fine
>
> hardware:
> two physical amd opteron 248's
>
>
> Booting 'xen'
>
> root (hd0,0)
> Filesystem type is ext2fs, partition type 0x83
> kernel /xen.gz com1=115200,8n1
> [Multiboot-elf, <0x100000:0x80408:0x31bf8>, shtab=0x1b2078,
> entry=0x100000]
> module /vmlinuz-2.6-xen0 root=/dev/sda4 ro conswitch=x console=tty0
> console=tt
> yS1,115200
> [Multiboot-module @ 0x1b3000, 0x7956a8 bytes]
> savedefault
> boot
> __ __ _____ ___ ___
> \ \/ /___ _ __ |___ / / _ \ / _ \
> \ // _ \ '_ \ |_ \| | | | | | |
> / \ __/ | | | ___) | |_| | |_| |
> /_/\_\___|_| |_| |____(_)___(_)___/
>
> http://www.cl.cam.ac.uk/netos/xen
> University of Cambridge Computer Laboratory
>
> Xen version 3.0.0 (root@xxxxxxxxxxxxxxxxxx) (gcc version 3.4.2 20041017
> (Red H6 Latest ChangeSet: Wed Feb 1 11:06:16 2006 +0000
> 8728:d609de73b9fa
>
> (XEN) Physical RAM map:
> (XEN) 0000000000000000 - 000000000009dc00 (usable)
> (XEN) 000000000009dc00 - 00000000000a0000 (reserved)
> (XEN) 00000000000d0000 - 0000000000100000 (reserved)
> (XEN) 0000000000100000 - 00000000dff60000 (usable)
> (XEN) 00000000dff60000 - 00000000dff72000 (ACPI data)
> (XEN) 00000000dff72000 - 00000000dff80000 (ACPI NVS)
> (XEN) 00000000dff80000 - 00000000e0000000 (reserved)
> (XEN) 00000000fec00000 - 00000000fec00400 (reserved)
> (XEN) 00000000fee00000 - 00000000fee01000 (reserved)
> (XEN) 00000000fff80000 - 0000000100000000 (reserved)
> (XEN) System RAM: 3582MB (3668980kB)
> (XEN) Xen heap: 14MB (14536kB)
> (XEN) Using scheduler: Simple EDF Scheduler (sedf)
> (XEN) found SMP MP-table at 000f7140
> (XEN) DMI present.
> (XEN) Using APIC driver default
> (XEN) ACPI: RSDP (v002 PTLTD ) @
> 0x00000000000f0(XEN) ACPI: XSDT (v001 PTLTD XSDT 0x06040000 LTP
> 0x00000000) @ 0x0000000f(XEN) ACPI: FADT (v003 AMD HAMMER
> 0x06040000 PTEC 0x000f4240) @ 0x00000000f(XEN) ACPI: SRAT (v001 AMD
> HAMMER 0x06040000 AMD 0x00000001) @ 0x000000003(XEN) ACPI: MADT (v001
> PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x0000000b(XEN) ACPI:
> ASF! (v016 MBI CETP 0x06040000 PTL 0x00000001) @
> 0x000000009(XEN) ACPI: DSDT (v001 AMD-K8 AMDACPI 0x06040000 MSFT
> 0x0100000e) @ 0x000000000(XEN) ACPI: Local APIC address 0xfee00000
> (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> (XEN) Processor #0 15:5 APIC version 16
> (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> (XEN) Processor #1 15:5 APIC version 16
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> (XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> (XEN) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
> (XEN) ACPI: IOAPIC (id[0x03] address[0xf9220000] gsi_base[24])
> (XEN) IOAPIC[1]: apic_id 3, version 17, address 0xf9220000, GSI 24-27
> (XEN) ACPI: IOAPIC (id[0x04] address[0xf9230000] gsi_base[28])
> (XEN) IOAPIC[2]: apic_id 4, version 17, address 0xf9230000, GSI 28-31
> (XEN) ACPI: IOAPIC (id[0x05] address[0xf9200000] gsi_base[32])
> (XEN) IOAPIC[3]: apic_id 5, version 17, address 0xf9200000, GSI 32-35
> (XEN) ACPI: IOAPIC (id[0x06] address[0xf9210000] gsi_base[36])
> (XEN) IOAPIC[4]: apic_id 6, version 17, address 0xf9210000, GSI 36-39
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
> (XEN) ACPI: IRQ0 used by override.
> (XEN) ACPI: IRQ2 used by override.
> (XEN) Enabling APIC mode: Flat. Using 5 I/O APICs
> (XEN) Using ACPI (MADT) for SMP configuration information
> (XEN) Initializing CPU#0
> (XEN) Detected 2193.790 MHz processor.
> (XEN) CPU0: AMD Flush Filter enabled
> (XEN) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> (XEN) CPU: L2 Cache: 1024K (64 bytes/line)
> (XEN) CPU0: AMD Opteron(tm) Processor 248 stepping 0a
> (XEN) Booting processor 1/1 eip 90000
> (XEN) Initializing CPU#1
> (XEN) CPU1: AMD Flush Filter enabled
> (XEN) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> (XEN) CPU: L2 Cache: 1024K (64 bytes/line)
> (XEN) CPU1: AMD Opteron(tm) Processor 248 stepping 08
> (XEN) Total of 2 processors activated.
> (XEN) ENABLING IO-APIC IRQs
> (XEN) ..TIMER: vector=0x31 pin1=2 pin2=-1
> (XEN) checking TSC synchronization across 2 CPUs: passed.
> (XEN) Platform timer is 1.193MHz PIT
> (XEN) Brought up 2 CPUs
> (XEN) mtrr: v2.0 (20020519)
> (XEN) *** LOADING DOMAIN 0 ***
> (XEN) Xen-ELF header found:
> 'GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=xen-3.0,VIRT_'(XEN) PHYSICAL
> MEMORY ARRANGEMENT:
> (XEN) Dom0 alloc.: 0000000007000000->0000000008000000 (865368 pages
> to be al)(XEN) VIRTUAL MEMORY ARRANGEMENT:
> (XEN) Loaded kernel: ffffffff80100000->ffffffff80689d18
> (XEN) Init. ramdisk: ffffffff8068a000->ffffffff8068a000
> (XEN) Phys-Mach map: ffffffff8068a000->ffffffff80d2c2c0
> (XEN) Start info: ffffffff80d2d000->ffffffff80d2e000
> (XEN) Page tables: ffffffff80d2e000->ffffffff80d39000
> (XEN) Boot stack: ffffffff80d39000->ffffffff80d3a000
> (XEN) TOTAL: ffffffff80000000->ffffffff81000000
> (XEN) ENTRY ADDRESS: ffffffff80100000
> (XEN) Scrubbing Free RAM: ....................................done.
> (XEN) Xen trace buffers: disabled
> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
> input to Xe.Linux version 2.6.14-xen0
> (root@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 3.6kernel direct
> mapping tables upto d4c58000 @ d3b000-13e7000
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
> ACPI: IOAPIC (id[0x03] address[0xf9220000] gsi_base[24])
> IOAPIC[1]: apic_id 3, version 17, address 0xf9220000, GSI 24-27
> ACPI: IOAPIC (id[0x04] address[0xf9230000] gsi_base[28])
> IOAPIC[2]: apic_id 4, version 17, address 0xf9230000, GSI 28-31
> ACPI: IOAPIC (id[0x05] address[0xf9200000] gsi_base[32])
> IOAPIC[3]: apic_id 5, version 17, address 0xf9200000, GSI 32-35
> ACPI: IOAPIC (id[0x06] address[0xf9210000] gsi_base[36])
> IOAPIC[4]: apic_id 6, version 17, address 0xf9210000, GSI 36-39
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
> Setting APIC routing to xen
> Using ACPI (MADT) for SMP configuration information
> Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
> Built 1 zonelists
> Kernel command line: root=/dev/sda4 ro conswitch=x console=tty0
> console=ttyS1,10Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 131072 bytes)
> Xen reported: 2193.790 MHz processor.
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
> Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
> Software IO TLB enabled:
> Aperture: 64 megabytes
> Bus range: 0x0000000040000000 - 0x0000000044000000
> Kernel range: 0xffff880004f78000 - 0xffff880008f78000
> Memory: 3337340k/3486048k available (3499k kernel code, 147968k
> reserved, 1310k)Calibrating delay using timer specific routine.. 5485.75
> BogoMIPS (lpj=10971515)Mount-cache hash table entries: 256
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 1024K (64 bytes/line)
> softlockup thread 0 started up.
> ----------- [cut here ] --------- [please bite here ] ---------
> Kernel BUG at kernel/softlockup.c:110
> invalid operand: 0000 [1] SMP
> CPU 0
> Modules linked in:
> Pid: 1, comm: swapper Not tainted 2.6.14-xen0 #1
> RIP: e030:[<ffffffff8015500c>] <ffffffff8015500c>{cpu_callback+76}
> RSP: e02b:ffff88000068be98 EFLAGS: 00010286
> RAX: ffffffff806890f8 RBX: 0000000000000001 RCX: 0000000000000001
> RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffffffff80507210
> RBP: ffff88000068beb8 R08: 00000000fffffffb R09: 0000000000000000
> R10: ffff88000068bcc8 R11: 0000000000000000 R12: 0000000000000080
> R13: ffffffff806890f8 R14: 0000000000000001 R15: 0000ffffffff8010
> FS: 0000000000000000(0000) GS:ffffffff80623800(0000)
> knlGS:0000000000000000
> CS: e033 DS: 0000 ES: 0000
> Process swapper (pid: 1, threadinfo ffff88000068a000, task
> ffff88000068d4b0)
> Stack: ffff88000068bea8 ffffffff80507210 0000000000000001
> 0000000000000003
> ffff88000068bee8 ffffffff80142248 ffffffff80506c00
> 0000000000000001
> 0000000000000008 ffffffff80506c00
> Call Trace:<ffffffff80142248>{notifier_call_chain+40}
> <ffffffff8014de57>{cpu_up} <ffffffff8010e163>{init+275}
> <ffffffff80111a9e>{child_rip+8}
> <ffffffff8010e050>{init+0} <ffffffff80111a96>{child_rip+0}
>
>
> Code: 0f 0b 68 ae a2 48 80 c2 6e 00 31 c0 89 d9 48 c7 c2 c2 a2 48
> RIP <ffffffff8015500c>{cpu_callback+76} RSP <ffff88000068be98>
> <0>Kernel panic - not syncing: Attempted to kill init!
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home