I found several build issues, mostly related to building outside of the source
tree. Below/attached adjustments for these.
Jan
--- 2.6.11-xen/arch/xen/i386/kernel/Makefile 2005-07-01 09:13:46.603829136
-0700
+++ nxen-guest/arch/xen/i386/kernel/Makefile 2005-07-01 09:15:04.493988032
-0700
@@ -84,12 +84,13 @@ $(obj)/vsyscall-syms.o: $(src)/vsyscall.
c-link := init_task.o
s-link := vsyscall-int80.o vsyscall-sysenter.o vsyscall-sigreturn.o
vsyscall.lds.o
-$(patsubst %.o,$(obj)/%.c,$(c-obj-y) $(c-link)) $(patsubst
%.o,$(obj)/%.S,$(s-obj-y) $(s-link)):
+$(patsubst %.o,$(obj)/%.c,$(c-obj-y) $(c-obj-m) $(c-link)) $(patsubst
%.o,$(obj)/%.S,$(s-obj-y) $(s-link)):
@ln -fsn $(srctree)/arch/i386/kernel/$(notdir $@) $@
$(obj)/vsyscall-int80.S: $(obj)/vsyscall-sigreturn.S
obj-y += $(c-obj-y) $(s-obj-y)
+obj-m += $(c-obj-m)
-clean-files += $(patsubst %.o,%.c,$(c-obj-y) $(c-obj-) $(c-link))
+clean-files += $(patsubst %.o,%.c,$(c-obj-y) $(c-obj-m) $(c-obj-) $(c-link))
clean-files += $(patsubst %.o,%.S,$(s-obj-y) $(s-obj-) $(s-link))
--- 2.6.11-xen/arch/xen/x86_64/kernel/acpi/Makefile 2005-07-01
09:14:30.288188104 -0700
+++ nxen-guest/arch/xen/x86_64/kernel/acpi/Makefile 2005-07-01
09:15:40.024586560 -0700
@@ -1,14 +1,18 @@
i386-obj-$(CONFIG_ACPI_BOOT) := boot.o
c-obj-$(CONFIG_X86_IO_APIC) := earlyquirk.o
-c-obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup.o
+c-obj-$(CONFIG_ACPI_SLEEP) += sleep.o
+s-obj-$(CONFIG_ACPI_SLEEP) += wakeup.o
c-link :=
$(patsubst %.o,$(obj)/%.c,$(c-obj-y) $(c-link)):
@ln -fsn $(srctree)/arch/i386/kernel/acpi/$(notdir $@) $@
+$(patsubst %.o,$(obj)/%.S,$(s-obj-y) $(s-link)):
+ @ln -fsn $(srctree)/arch/x86_64/kernel/acpi/$(notdir $@) $@
+
$(patsubst %.o,$(obj)/%.c,$(i386-obj-y)):
- ln -fsn $(srctree)/arch/xen/i386/kernel/acpi/$(notdir $@) $@
+ @ln -fsn $(srctree)/arch/xen/i386/kernel/acpi/$(notdir $@) $@
obj-y += $(c-obj-y) $(s-obj-y) $(i386-obj-y)
--- 2.6.11-xen/arch/xen/x86_64/kernel/Makefile 2005-07-01 09:14:26.111823008
-0700
+++ nxen-guest/arch/xen/x86_64/kernel/Makefile 2005-07-01 09:15:37.133026144
-0700
@@ -22,7 +22,7 @@ s-obj-y :=
#obj-$(CONFIG_X86_MCE) += mce.o
#obj-$(CONFIG_MTRR) += ../../i386/kernel/cpu/mtrr/
obj-$(CONFIG_ACPI_BOOT) += acpi/
-obj-$(CONFIG_X86_MSR) += msr.o
+c-obj-$(CONFIG_X86_MSR) += msr.o
obj-$(CONFIG_MICROCODE) += microcode.o
obj-$(CONFIG_X86_CPUID) += cpuid.o
#obj-$(CONFIG_SMP) += smp.o smpboot.o trampoline.o
@@ -55,13 +55,14 @@ quirks-y += ../../../i386/kernel/quirk
c-link := init_task.o
s-link := vsyscall.o
-$(patsubst %.o,$(obj)/%.c,$(c-obj-y) $(c-link)) $(patsubst
%.o,$(obj)/%.S,$(s-obj-y) $(s-link)):
- ln -fsn $(srctree)/arch/x86_64/kernel/$(notdir $@) $@
+$(patsubst %.o,$(obj)/%.c,$(c-obj-y) $(c-obj-m) $(c-link)) $(patsubst
%.o,$(obj)/%.S,$(s-obj-y) $(s-link)):
+ @ln -fsn $(srctree)/arch/x86_64/kernel/$(notdir $@) $@
$(patsubst %.o,$(obj)/%.c,$(i386-obj-y)):
- ln -fsn $(srctree)/arch/xen/i386/kernel/$(notdir $@) $@
+ @ln -fsn $(srctree)/arch/xen/i386/kernel/$(notdir $@) $@
obj-y += $(c-obj-y) $(s-obj-y) $(i386-obj-y)
+obj-m += $(c-obj-m)
-clean-files += $(patsubst %.o,%.c,$(c-obj-y) $(c-obj-) $(c-link) $(i386-obj-y))
+clean-files += $(patsubst %.o,%.c,$(c-obj-y) $(c-obj-m) $(c-obj-) $(c-link)
$(i386-obj-y))
clean-files += $(patsubst %.o,%.S,$(s-obj-y) $(s-obj-) $(s-link))
--- 2.6.11-xen/arch/xen/x86_64/pci/Makefile 2005-07-01 09:14:41.241522944
-0700
+++ nxen-guest/arch/xen/x86_64/pci/Makefile 2005-07-01 09:15:46.242641272
-0700
@@ -8,34 +8,31 @@ CFLAGS += -Iarch/$(XENARCH)/pci
CFLAGS += -Iarch/i386/pci
-c-obj-y := i386.o
-c-obj-y += fixup.o
-c-obj-$(CONFIG_ACPI_PCI) += acpi.o
-c-obj-y += legacy.o common.o
-c-obj-$(CONFIG_PCI_DIRECT)+= direct.o
+c-i386-obj-y := i386.o
+c-i386-obj-y += fixup.o
+c-i386-obj-$(CONFIG_ACPI_PCI) += acpi.o
+c-i386-obj-y += legacy.o common.o
+c-i386-obj-$(CONFIG_PCI_DIRECT)+= direct.o
c-xen-obj-y += irq.o
# mmconfig has a 64bit special
c-obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o
c-obj-$(CONFIG_NUMA) += k8-bus.o
-c-direct-y += ../../i386/pci/direct.o
-c-acpi-y += ../../i386/pci/acpi.o
-c-legacy-y += ../../i386/pci/legacy.o
-c-irq-y += ../../i386/pci/irq.o
-c-common-y += ../../i386/pci/common.o
-c-fixup-y += ../../i386/pci/fixup.o
-c-i386-y += ../../i386/pci/i386.o
-
c-link :=
-$(patsubst %.o,$(obj)/%.c,$(c-xen-obj-y) $(c-link)):
+$(patsubst %.o,$(obj)/%.c,$(c-xen-obj-y)):
@ln -fsn $(srctree)/arch/xen/i386/pci/$(notdir $@) $@
$(patsubst %.o,$(obj)/%.c,$(c-obj-y) $(c-link)):
+ @ln -fsn $(srctree)/arch/x86_64/pci/$(notdir $@) $@
+
+$(patsubst %.o,$(obj)/%.c,$(c-i386-obj-y)):
@ln -fsn $(srctree)/arch/i386/pci/$(notdir $@) $@
-obj-y += $(c-obj-y)
+obj-y += $(c-i386-obj-y) $(c-obj-y)
obj-y += $(c-xen-obj-y)
clean-files += $(patsubst %.o,%.c,$(c-obj-y) $(c-obj-) $(c-link))
+clean-files += $(patsubst %.o,%.c,$(c-i386-obj-y) $(c-i386-obj-))
+clean-files += $(patsubst %.o,%.c,$(c-xen-obj-y) $(c-xen-obj-))
xenlinux-links.patch
Description: Binary data
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home