I am unable to boot Dom0 on my IBM eServer BladeCenter HS20, type 8843,
EMT64 blades. I have read reports that Dom0 boots on Opteron boxes, but
on my EMT64 blades, it does not. Has anyone else encountered this
problem on EMT64 hardware?
Here are the errors I am getting:
This is on a SLES 9 box, gcc version 3.3.3 (SuSE Linux):
kernel (hd0,0)/boot/xen.gz dom0_mem=256000 com2=19200,8n1 console=vga,com2 nor
eboot
[Multiboot-elf, <0x100000:0x5e358:0x22ca8>, shtab=0x181078, entry=0x100000]
module (hd0,0)/boot/vmlinuz-2.6-xen0 root=/dev/sda6 ro console=tty0
[Multiboot-module @ 0x182000, 0x67e5f0 bytes]
module (hd0,0)/initrd-2.6.11.12-xen0
__ __ _____ ___ _ _
\ \/ /___ _ __ |___ / / _ \ __| | _____ _____| |
\ // _ \ '_ \ |_ \| | | |__ / _` |/ _ \ \ / / _ \ |
/ \ __/ | | | ___) | |_| |__| (_| | __/\ V / __/ |
/_/\_\___|_| |_| |____(_)___/ \__,_|\___| \_/ \___|_|
http://www.cl.cam.ac.uk/netos/xen
University of Cambridge Computer Laboratory
Xen version 3.0-devel (root@xxxxxxxxxxxxxxxxxx) (gcc version 3.3.3 (SuSE
Linux)) Wed Jun 15 08:19:06 CDT 2005
Latest ChangeSet: information unavailable
(XEN) Physical RAM map:
(XEN) 0000000000000000 - 000000000009d400 (usable)
(XEN) 000000000009d400 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 000000003ffbe680 (usable)
(XEN) 000000003ffbe680 - 000000003ffd0000 (ACPI data)
(XEN) 000000003ffd0000 - 0000000040000000 (reserved)
(XEN) 00000000fec00000 - 0000000100000000 (reserved)
(XEN) System RAM: 1023MB (1047916kB)
(XEN) Xen heap: 14MB (14812kB)
(XEN) found SMP MP-table at 0009d540
(XEN) DMI 2.3 present.
(XEN) Using APIC driver default
(XEN) ACPI: RSDP (v000 IBM ) @
0x00000000000fdfc0
(XEN) ACPI: RSDT (v001 IBM SERBLADE 0x00001000 IBM 0x45444f43) @
0x000000003ffcff80
(XEN) ACPI: FADT (v002 IBM SERBLADE 0x00001000 IBM 0x45444f43)P)
\uffff\uffff\u0255\uffff\uffff\u1655\uffffXEN) ACPI: LAPIC (acpi_id[0x00]
lapic_id[0x00] enabled)
(XEN) Processor #0 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
(XEN) Processor #6 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
(XEN) Processor #7 15:4 APIC version 20
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
(XEN) ACPI: LAPIC_NMI
(acpi_id[5%\uffffe%B\uffff\u0349\uffff\uffff}\uffff\uffff\u015d\uffff\uffff\uffff\uffff\uffff}\uffff\uffff\u0161\uffff\uffff\uffff\uffff\uffff\u0655\uffffXEN)
ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ11 used by override.
(XEN) Enabling APIC mode: Flat. Using 4 I/O APICs
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Initializing CPU#0
(XEN) Detected 3600.316 MHz processor.
(XEN) Using scheduler: Borrowed Virtual Time (bvt)
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 1024K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPUU 3.60GHz stepping 01
(XEN) Total of 4 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) ..TIMER: vector=0x31 pin1=2 pin2=-1
(XEN) checking TSC synchronization across 4 CPUs: passed.
(XEN) Time init:
(XEN) .... cpu_freq: 00000000:D6987764
(XEN) .... scale: 00000001:1C6B619C
(XEN) .... Wall Clock: 1118847138s 160000us
(XEN) Brought up 4 CPUs
(XEN) mtrr: v2.0 (20020519)
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen-ELF header found:
'GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=3.0,VIRT_BASE=0xffffffff80100000,LOADER=generic'
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000008000000->0000000010000000 (31232 pages to be
allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff80100000->ffffffff80578086
(XEN) Init. ramdisk: ffffffff80(XEN) Start info:
ffffffff805bf000->ffffffff805c0000
(XEN) Boot stack: ffffffff805c0000->ffffffff805c1000
(XEN) TOTAL: ffffffff80000000->ffffffff80800000
(XEN) ENTRY ADDRESS: ffffffff80100000
(XEN) Scrubbing Free RAM: ...........done.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to
Xen).
Linux version 2.6.11.12-xen0 (root@bl2-1) (gcc version 3.3.3 (SuSE Linux)) #1
Wed Jun 15 08:25:11 CDT 2005
kernel direct mapping tables upto
ffff88000fa00000L&SVB\uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffffJr
\u024d\uffff\u1579\uffff}\uffff\uffff\uffff\uffff\uffff\u044d\uffff\uffff\uffff\uffff\u0455\uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff\u024d\uffff\u1579\uffff}\uffff\uffff\uffff\uffff\uffff\u044d\uffff\uffff\uffff\uffff\u0455\uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff\u024d\uffff\u1579\uffff}\uffff\uffff\uffff\uffff\uffff\u044d\uffff\uffff\uffff\uffff\u0455\uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff\u024d\uffff\u1579\uffff}\uffff\uffff\uffff\uffff\uffff\u044d\uffff\uffff\uffff\uffff\u0455\uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff\u024d\uffff\u1579\uffff}\uffff\uffff\uffff\uffff\uffff\u044d\uffff\uffff\uffff\uffff\u0455\uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff\u024d\uffff\u1579\uffff}\uffff\uffff\uffff\uffff\uffff\u044d\uffff\uffff\uffff\uffff\u0455\uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff\u024d\uffff\u1579\uffff}\uffff\uffff\uffff\uffff\uffff\u044d\uffff\uffff\uffff\uffff\u0455\uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff\u024d\uffff\u1579\uffff}\uffff\uffff\uffff\uffff}fec10000]
gsi_base[24])\uffff\uffff\uffff\uffff\uffff\uffff\u0455\uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff\u024d\uffff\u1579\uffff}\uffff\uffff\uffff\uffff\uffff\u044d\uffff\uffff\uffff\uffff\u0455\uffff\uffff\uffff\uffff\uffff\uffff\uffff\uffff\u024d\uffff\u1579\uffff}\uffff\uffff\uffff\uffff\uffff\u044d\uffff\uffff\uffff\uffff\u0455\uffff\uffff\uffff\uffff\uffff\uffff\uffff
IOAPIC[1]: apic_id 13, version 32, address 0xfec10000, GSI 24-47
ACPI: IOAPIC (id[0x0c] address[0xfec81000] gsi_base[48])
IOAPIC[2]: apic_id 12, version 32, address 0xfec81000, GSI 48-71
ACPI: IOAPIC (id[0x0b] address[0xfec81400] gsi_base[72])
IOAPIC[3]: apic_id 11, version 32, address 0xfec81400, GSI 72-95
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
Setting APIC routing to flat
%%\uffff\u0455\uffff\uffff\uffffkaround, the "pci=routeirq" argument restores
the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@xxxxxx
** so I can fix the driver.
PCI: IRQ init
Grant table initialized
Initializing Cryptographic API
Real Time Clock Driver v1.12
i8042.c: Can't read CTR while initializing i8042.
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy dfloppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
HP CISS Driver (v 2.6.4)
Intel(R) PRO/1000 Network Driver - version 5.6.10.1-k2
Copyright (c) 1999-2004 Intel Corporation.
pcnet32.c:v1.30i 06.28.2004 tsbogend@xxxxxxxxxxxxxxxx
e100: Intel(R) PRO/100 Network Driver, 3.3.6-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation
tg3.c:v3.23 (February 15, 2005)
ACPI: PCI interrupt 0000:05:01.0[A] -> GSI 77 (level, low) -> IRQ 77
Unable to handle kernel NULL pointer dereference at 0000000000000880 RIP:
<ffffffff80116d42>{do_page_fault+370}
Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP:
<ffffffff8011683f>{dump_pagetable+47}
Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP:
<ffffffff8011683f>{dump_pagetable+47}
Unable to handle kernel NULL pointer dereferentable+47}
Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP:
<ffffffff8011683f>{dump_pagetable+47}
Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP:
<ffffffff8011683f>{dump_pagetable+47}
Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP:
<ffffffff8011683f>{dump_pagetable+47}
Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP:
<ffffffff8011683f>{dump_pagetable+47}
The errors repeat ad nauseum at this point.....
----------------------------------------------------------------------
And this one from a GCC 4.0 Xen build (FC4)--the offset is different
tg3.c:v3.23 (February 15, 2005)
ACPI: PCI interrupt 0000:05:01.0[A] -> GSI 77 (level, low) -> IRQ 77
Unable to handle kernel NULL pointer dereference at 0000000000000880 RIP:
<ffffffff80116d90>{do_page_fault+432}
Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP:
<ffffffff80116933>{dump_pagetable+51}
Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP:
<ffffffff80116933>{dump_pagetable+51}
Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP:
<ffffffff80116933>{dump_pagetable+51}
Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP:
<ffffffff80116933>{dump_pagetable+51}
Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP:
<ffffffff80116933>{dump_pagetable+51}
Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP:
The errors repeat ad nauseum at this point.....
----------------------------------------------------------------------
--
Regards,
David F Barrera
Linux Technology Center
Systems and Technology Group, IBM
"The wisest men follow their own direction. "
Euripides
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home