__ __ _____ ___ _ _ \ \/ /___ _ __ |___ / / _ \ __| | _____ _____| | \ // _ \ '_ \ |_ \| | | |__ / _` |/ _ \ \ / / _ \ | / \ __/ | | | ___) | |_| |__| (_| | __/\ V / __/ | /_/\_\___|_| |_| |____(_)___/ \__,_|\___| \_/ \___|_| http://www.cl.cam.ac.uk/netos/xen University of Cambridge Computer Laboratory Xen version 3.0-devel (kraxel@xxxxxxxxxxxxx) (gcc version 3.3.5 20050117 (prerelease) (SUSE Linux)) Thu Apr 21 14:36:34 CEST 2005 Latest ChangeSet: information unavailable (XEN) Physical RAM map: (XEN) 0000000000000000 - 000000000009f000 (usable) (XEN) 000000000009f000 - 00000000000a0000 (reserved) (XEN) 00000000000f0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 000000003fffc000 (usable) (XEN) 000000003fffc000 - 000000003ffff000 (ACPI data) (XEN) 000000003ffff000 - 0000000040000000 (ACPI NVS) (XEN) 00000000ffff0000 - 0000000100000000 (reserved) (XEN) System RAM: 1023MB (1048172kB) (XEN) Xen heap: 10MB (10792kB) (XEN) CPU0: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0 (XEN) CPU caps: 0383f9ff 00000000 00000000 00000000 (XEN) ACPI: RSDP (v000 ASUS ) @ 0x000f5a60 (XEN) ACPI: RSDT (v001 ASUS P3B_F 0x30303031 MSFT 0x31313031) @ 0x3fffc000 (XEN) ACPI: FADT (v001 ASUS P3B_F 0x30303031 MSFT 0x31313031) @ 0x3fffc080 (XEN) ACPI: BOOT (v001 ASUS P3B_F 0x30303031 MSFT 0x31313031) @ 0x3fffc040 (XEN) ACPI: DSDT (v001 ASUS P3B_F 0x00001000 MSFT 0x0100000b) @ 0x00000000 (XEN) Using scheduler: Borrowed Virtual Time (bvt) (XEN) Initializing CPU#0 (XEN) Detected 451.030 MHz processor. (XEN) Local APIC disabled by BIOS -- reenabling. (XEN) Found and enabled local APIC! (XEN) CPU0: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0 (XEN) CPU caps: 0383fbff 00000000 00000000 00000000 (XEN) CPU0 booted (XEN) SMP motherboard not detected. (XEN) enabled ExtINT on CPU#0 (XEN) ESR value before enabling vector: 00000000 (XEN) ESR value after enabling vector: 00000000 (XEN) Using local APIC timer interrupts. (XEN) Calibrating APIC timer for CPU0... (XEN) ..... CPU speed is 451.0230 MHz. (XEN) ..... Bus speed is 100.2271 MHz. (XEN) ..... bus_scale = 0x000066A2 (XEN) Time init: (XEN) .... System Time: 12217304ns (XEN) .... cpu_freq: 00000000:1AE22E48 (XEN) .... scale: 00000002:3796C7A7 (XEN) .... Wall Clock: 1114087225s 40000us (XEN) PCI: PCI BIOS revision 2.10 entry at 0xf08c0, last bus=1 (XEN) PCI: Using configuration type 1 (XEN) PCI: Probing PCI hardware (XEN) PCI: Probing PCI hardware (bus 00) (XEN) PCI: Using IRQ router PIIX/ICH [8086/7110] at 00:04.0 (XEN) Limiting direct PCI/PCI transfers. (XEN) mtrr: v2.0 (20020519) (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen-ELF header found: 'GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=3.0,VIRT_BASE=0xC0000000,LOADER=generic' (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 10000000->20000000 (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: c0100000->c05764c4 (XEN) Init. ramdisk: c0577000->c27da800 (XEN) Phys-Mach map: c27db000->c281b000 (XEN) Page tables: c281b000->c2827000 (XEN) Start info: c2827000->c2828000 (XEN) Boot stack: c2828000->c2829000 (XEN) TOTAL: c0000000->c2c00000 (XEN) ENTRY ADDRESS: c0100000 (XEN) Initrd len 0x2263800, start at 0xc0577000 (XEN) Scrubbing Free RAM: ...........done. (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen). Linux version 2.6.11-xen0-1.1307 (kraxel@eskarina) (gcc version 3.3.5 20050117 (prerelease) (SUSE Linux)) #1 Thu Apr 21 14:39:52 CEST 2005 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000010000000 (usable) 256MB LOWMEM available. DMI 2.3 present. IRQ lockup detection disabled Allocating PCI resources starting at 10000000 (gap: 10000000:f0000000) Built 1 zonelists Kernel command line: Initializing CPU#0 PID hash table entries: 2048 (order: 11, 32768 bytes) Xen reported: 451.030 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 219264k/262144k available (3049k kernel code, 42804k reserved, 957k data, 324k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU: Intel Pentium III (Katmai) stepping 03 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... disabled checking if image is initramfs... it is Freeing initrd memory: 35214k freed NET: Registered protocol family 16 PCI: Using configuration type Xen xen_mem: Initialising balloon driver. SCSI subsystem initialized PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Probing PCI hardware (bus 01) PCI: Probing PCI hardware Grant table initialized IA-32 Microcode Update Driver: v1.14-xen Initializing Cryptographic API Limiting direct PCI/PCI transfers. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) HP CISS Driver (v 2.6.4) Intel(R) PRO/1000 Network Driver - version 5.6.10.1-k2 Copyright (c) 1999-2004 Intel Corporation. pcnet32.c:v1.30i 06.28.2004 tsbogend@xxxxxxxxxxxxxxxx e100: Intel(R) PRO/100 Network Driver, 3.3.6-k2-NAPI e100: Copyright(c) 1999-2004 Intel Corporation Linux Tulip driver version 1.1.13 (May 11, 2002) (XEN) PCI: Found IRQ 11 for device 00:0c.0 PCI: Obtained IRQ 11 for device 0000:00:0c.0 tulip0: MII transceiver #1 config 3000 status 782d advertising 01e1. eth0: Lite-On 82c168 PNIC rev 32 at 0001b800, 00:A0:CC:55:9B:F9, IRQ 11. Xen virtual console successfully installed as ttyS0 Event-channel device installed. Blkif backend is using grant tables. Initialising Xen netif backend Blkif frontend is using grant tables. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 0000:00:04.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA hda: IBM-DTLA-305040, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: HL-DT-ST DVDRAM GSA-4040B, ATAPI CD/DVD-ROM drive hdd: LG CD-RW CED-8080B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 80418240 sectors (41174 MB) w/380KiB Cache, CHS=65535/16/63, UDMA(33) hda: hda1 hda2 < hda5 hda6 hda7 > hda4 hdc: ATAPI 32X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA Red Hat/Adaptec aacraid driver (1.1.2-lk2 Apr 21 2005) 3ware Storage Controller device driver for Linux v1.26.02.000. Fusion MPT base driver 3.01.18 Copyright (c) 1999-2004 LSI Logic Corporation Fusion MPT SCSI Host driver 3.01.18 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: PS/2 Generic Mouse on isa0060/serio1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: automatically using best checksumming function: pIII_sse pIII_sse : 668.400 MB/sec raid5: using function: pIII_sse (668.400 MB/sec) md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@xxxxxxxxxx NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 16Kbytes TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) NET: Registered protocol family 1 NET: Registered protocol family 17 Bridge firewalling registered Freeing unused kernel memory: 324k freed