Perhaps start xend with 'xend trace_start' and then see if
xend.log can shed any light.
Xend work fine i thing i have broken kernel or system.
Have you used your own kernel config? You haven't disabled
CONFIG_XEN_NETDEV_FRONTEND have you?
What happens if you use our binary install?
The same, I tryed xen-2.0-install (2.4.27 and 2.4.9). Meaby gentoo 2004.3
dont work correctly ?
i start believe the same... with same kernel ttylinux now boots, network
is ok, rtc-errors (...) of course. with my cloned gentoo xen0 system
this happens (xen 2.0.1 source, but similar with bin-version):
Linux version 2.6.9-xenU (root@vm0) (gcc version 3.3.4 20040623 (Gentoo
Linux 3.3.4-r1, ssp-3.3.2-2, pie-8.7.6)) #2 Sat Nov 27 17:36:31 GMT 2004
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000004000000 (usable)
64MB LOWMEM available.
DMI not present.
Built 1 zonelists
Kernel command line:
ip=192.168.1.101:1.2.3.4:192.168.1.1:255.255.255.0::eth0:off
root=/dev/hda1 ro 3
Initializing CPU#0
PID hash table entries: 512 (order: 9, 8192 bytes)
Xen reported: 1357.516 MHz processor.
Using tsc for high-res timesource
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 62004k/65536k available (1768k kernel code, 3492k reserved, 478k
data, 112k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: AMD Athlon(tm) stepping 00
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... disabled
NET: Registered protocol family 16
Initializing Cryptographic API
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Xen virtual console successfully installed as tty
Event-channel device installed.
Starting Xen Balloon driver
xen_blk: Initialising virtual block device driver
Using anticipatory io scheduler
Unable to handle kernel NULL pointer dereference at virtual address 00000008
printing eip:
c0185116
*pde = ma 00000000 pa 55555000
[<c0185203>] sysfs_create_dir+0x40/0x73
[<c0185203>] sysfs_create_dir+0x40/0x73
[<c0200779>] create_dir+0x1f/0x4b
[<c0200c6d>] kobject_add+0x93/0xdd
[<c0200cdf>] kobject_register+0x28/0x59
[<c021da17>] blk_register_queue+0x96/0xc0
[<c02283dc>] xlvbd_get_gendisk+0x19d/0x1bb
[<c0228462>] xlvbd_init_device+0x68/0xdc
[<c022853b>] xlvbd_init+0x65/0x98
[<c0227d1e>] blkif_connect+0xae/0xc2
[<c0227459>] blkif_int+0x0/0x19a
[<c0227eaa>] blkif_ctrlif_rx+0x36/0x38
[<c0108a56>] __ctrl_if_rxmsg_deferred+0x4a/0x59
[<c012b8ae>] worker_thread+0x1ea/0x2e0
[<c0108a0c>] __ctrl_if_rxmsg_deferred+0x0/0x59
[<c0118cae>] default_wake_function+0x0/0x12
[<c0118cae>] default_wake_function+0x0/0x12
[<c012b6c4>] worker_thread+0x0/0x2e0
[<c012f8e9>] kthread+0xa5/0xab
[<c012f844>] kthread+0x0/0xab
[<c010ed7d>] kernel_thread_helper+0x5/0xb
Oops: 0000 [#1]
PREEMPT
Modules linked in:
CPU: 0
EIP: 0061:[<c0185116>] Not tainted VLI
EFLAGS: 00010292 (2.6.9-xenU)
EIP is at create_dir+0x17/0x9a
eax: c10ebe48 ebx: c118ce3c ecx: 00000000 edx: c118ce40
esi: 00000000 edi: c10ebe48 ebp: c10dec00 esp: c10ebe1c
ds: 007b es: 007b ss: 0069
Process events/0 (pid: 3, threadinfo=c10ea000 task=c10d9020)
Stack: c10afe2c c02fbaf0 c0185203 c118ce3c c118ce3c c10afe2c c0185203
c118ce3c
00000000 c118ce40 c10ebe48 00000000 00000000 c0200779 c118ce3c
c118ce3c
ffffffea c0200c6d c118ce3c fffffffd c118ce3c ffffffea c118ce3c
c0200cdf
Call Trace:
[<c0185203>] sysfs_create_dir+0x40/0x73
[<c0185203>] sysfs_create_dir+0x40/0x73
[<c0200779>] create_dir+0x1f/0x4b
[<c0200c6d>] kobject_add+0x93/0xdd
[<c0200cdf>] kobject_register+0x28/0x59
[<c021da17>] blk_register_queue+0x96/0xc0
[<c02283dc>] xlvbd_get_gendisk+0x19d/0x1bb
[<c0228462>] xlvbd_init_device+0x68/0xdc
[<c022853b>] xlvbd_init+0x65/0x98
[<c0227d1e>] blkif_connect+0xae/0xc2
[<c0227459>] blkif_int+0x0/0x19a
[<c0227eaa>] blkif_ctrlif_rx+0x36/0x38
[<c0108a56>] __ctrl_if_rxmsg_deferred+0x4a/0x59
[<c012b8ae>] worker_thread+0x1ea/0x2e0
[<c0108a0c>] __ctrl_if_rxmsg_deferred+0x0/0x59
[<c0118cae>] default_wake_function+0x0/0x12
[<c0118cae>] default_wake_function+0x0/0x12
[<c012b6c4>] worker_thread+0x0/0x2e0
[<c012f8e9>] kthread+0xa5/0xab
[<c012f844>] kthread+0x0/0xab
[<c010ed7d>] kernel_thread_helper+0x5/0xb
Code: 2f 2f c0 c7 80 88 00 00 00 e0 2e 2f c0 83 40 24 01 31 c0 c3 83 ec
18 89 74 24 10 89 7c 24 14 89 5c 24 0c 8b 74 24 20 8b 7c 24 28 <8b> 46
08 8d 48 68 ff 48 68 0f 88 c3 03 00 00 89 34 24 8b 44 24
<6>xen_net: Initialising virtual ethernet driver.
xen_net: Failed to connect all virtual interfaces: err=-100
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
ip_conntrack version 2.1 (512 buckets, 4096 max) - 332 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@xxxxxxxxxxx>.
http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
IP-Config: Device `eth0' not found.
--- hangs ---
my xend.log (xend trace_start) says the following:
[2004-11-27 22:03:23 xend] INFO (SrvDaemon:607) Xend Daemon started
[2004-11-27 22:03:23 xend] INFO (XendRoot:91) EVENT> xend.start 0
[2004-11-27 22:03:36 xend] DEBUG (XendDomainInfo:720) init_domain>
Created domain=5 name=vm101 memory=64
[2004-11-27 22:03:36 xend] INFO (console:92) Created console id=13
domain=5 port=9605
[2004-11-27 22:03:36 xend] DEBUG (XendDomainInfo:1102) Creating vbd
dom=5 uname=phy:vg1/vm101
[2004-11-27 22:03:36 xend] DEBUG (blkif:146) Connecting blkif
<BlkifBackendInterface 5 0>
[2004-11-27 22:03:36 xend] DEBUG (XendDomainInfo:1102) Creating vbd
dom=5 uname=phy:vg1/vm101-swap
[2004-11-27 22:03:36 xend] DEBUG (blkif:146) Connecting blkif
<BlkifBackendInterface 5 0>
[2004-11-27 22:03:36 xend] DEBUG (XendDomainInfo:1102) Creating vbd
dom=5 uname=phy:sdb7
[2004-11-27 22:03:36 xend] DEBUG (blkif:146) Connecting blkif
<BlkifBackendInterface 5 0>
[2004-11-27 22:03:36 xend] DEBUG (XendDomainInfo:1102) Creating vbd
dom=5 uname=phy:sdc5
[2004-11-27 22:03:36 xend] DEBUG (blkif:146) Connecting blkif
<BlkifBackendInterface 5 0>
[2004-11-27 22:03:36 xend] DEBUG (XendDomainInfo:1079) Creating vif
dom=5 vif=0 mac=aa:00:00:57:6a:d7
[2004-11-27 22:03:36 xend] INFO (XendRoot:91) EVENT> xend.console.create
[13, 5, 9605]
[2004-11-27 22:03:37 xend] INFO (XendRoot:91) EVENT> xend.domain.create
['vm101', '5']
[2004-11-27 22:03:37 xend] INFO (XendRoot:91) EVENT> xend.domain.unpause
['vm101', '5']
[2004-11-27 22:03:37 xend] DEBUG (blkif:192) Connecting blkif to event
channel <BlkifBackendInterface 5 0> ports=19:3
[2004-11-27 22:03:55 xend] INFO (console:42) Console connected 13
127.0.0.1 32794
[2004-11-27 22:03:55 xend] INFO (XendRoot:91) EVENT>
xend.console.connect [13, '127.0.0.1', 32794]
any hints? what's going wrong here? what's other than in older gentoo?
it wasn't a problem like that to get xeno-unstable or 1.2 to work on
older versions. devfs replaced with udev now.
Thanks,
Björn
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel
|
Home