# HG changeset patch
# User Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>
# Date 1320173074 0
# Node ID 386f078de0ea55c1ff982ab045c4f8c2efe74d01
# Parent 7648496d4ff12d41a8445c2b125173906d25bce7
docs: introduce an xl man page in pod format
This is the initial version of an xl man page, based on the old xm man
page. Almost every command implemented in xl should be present, a
notable exception are the tmem commands that are currently missing.
Further improvements and clarifications to this man page are very
welcome.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>
Acked-by: Ian Jackson <ian.jackson@xxxxxxxxxxxxx>
Committed-by: Ian Jackson <ian.jackson@xxxxxxxxxxxxx>
---
diff -r 7648496d4ff1 -r 386f078de0ea docs/man/xl.pod.1
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/docs/man/xl.pod.1 Tue Nov 01 18:44:34 2011 +0000
@@ -0,0 +1,805 @@
+=head1 NAME
+
+XL - Xen management tool, based on LibXenlight
+
+=head1 SYNOPSIS
+
+B<xl> I<subcommand> [I<args>]
+
+=head1 DESCRIPTION
+
+The B<xl> program is the new tool for managing Xen guest
+domains. The program can be used to create, pause, and shutdown
+domains. It can also be used to list current domains, enable or pin
+VCPUs, and attach or detach virtual block devices.
+The old B<xm> tool is deprecated and should not be used.
+
+The basic structure of every B<xl> command is almost always:
+
+=over 2
+
+B<xl> I<subcommand> [I<OPTIONS>] I<domain-id>
+
+=back
+
+Where I<subcommand> is one of the subcommands listed below, I<domain-id>
+is the numeric domain id, or the domain name (which will be internally
+translated to domain id), and I<OPTIONS> are subcommand specific
+options. There are a few exceptions to this rule in the cases where
+the subcommand in question acts on all domains, the entire machine,
+or directly on the Xen hypervisor. Those exceptions will be clear for
+each of those subcommands.
+
+=head1 NOTES
+
+Most B<xl> operations rely upon B<xenstored> and B<xenconsoled>: make
+sure you start the script B</etc/init.d/xencommons> at boot time to
+initialize all the daemons needed by B<xl>.
+
+In the most common network configuration, you need to setup a bridge in dom0
+named B<xenbr0> in order to have a working network in the guest domains.
+Please refer to the documentation of your Linux distribution to know how to
+setup the bridge.
+
+Most B<xl> commands require root privileges to run due to the
+communications channels used to talk to the hypervisor. Running as
+non root will return an error.
+
+=head1 DOMAIN SUBCOMMANDS
+
+The following subcommands manipulate domains directly. As stated
+previously, most commands take I<domain-id> as the first parameter.
+
+=over 4
+
+=item B<create> [I<OPTIONS>] I<configfile>
+
+The create subcommand requires a config file: see L<xldomain.cfg> for
+full details of that file format and possible options.
+
+I<configfile> can either be an absolute path to a file, or a relative
+path to a file located in /etc/xen.
+
+Create will return B<as soon> as the domain is started. This B<does
+not> mean the guest OS in the domain has actually booted, or is
+available for input.
+
+B<OPTIONS>
+
+=over 4
+
+=item B<-q>, B<--quiet>
+
+No console output.
+
+=item B<-f=FILE>, B<--defconfig=FILE>
+
+Use the given configuration file.
+
+=item B<-n>, B<--dryrun>
+
+Dry run - prints the resulting configuration in SXP but does not create
+the domain.
+
+=item B<-p>
+
+Leave the domain paused after it is created.
+
+=item B<-c>
+
+Attach console to the domain as soon as it has started. This is
+useful for determining issues with crashing domains.
+
+=back
+
+B<EXAMPLES>
+
+=over 4
+
+=item I<with config file>
+
+ xl create DebianLenny
+
+This creates a domain with the file /etc/xen/DebianLenny, and returns as
+soon as it is run.
+
+=back
+
+=item B<console> I<domain-id>
+
+Attach to domain I<domain-id>'s console. If you've set up your domains to
+have a traditional log in console this will look much like a normal
+text log in screen.
+
+Use the key combination Ctrl+] to detach the domain console.
+
+=item B<vncviewer> [I<OPTIONS>] I<domain-id>
+
+Attach to domain's VNC server, forking a vncviewer process.
+
+B<OPTIONS>
+
+=over 4
+
+=item I<--autopass>
+
+Pass VNC password to vncviewer via stdin.
+
+=back
+
+=item B<destroy> I<domain-id>
+
+Immediately terminate the domain I<domain-id>. This doesn't give the
+domain OS any chance to react, and is the equivalent of ripping the
+power cord out on a physical machine. In most cases you will want to
+use the B<shutdown> command instead.
+
+=item B<domid> I<domain-name>
+
+Converts a domain name to a domain id.
+
+=item B<domname> I<domain-id>
+
+Converts a domain id to a domain name.
+
+=item B<rename> I<domain-id> I<new-name>
+
+Change the domain name of I<domain-id> to I<new-name>.
+
+=item B<dump-core> I<domain-id> [I<filename>]
+
+Dumps the virtual machine's memory for the specified domain to the
+I<filename> specified, without pausing the domain. The dump file will
+be written to a distribution specific directory for dump files. Such
+as: /var/lib/xen/dump or /var/xen/dump.
+
+=item B<help> [I<--long>]
+
+Displays the short help message (i.e. common commands).
+
+The I<--long> option prints out the complete set of B<xl> subcommands,
+grouped by function.
+
+=item B<list> [I<OPTIONS>] [I<domain-id> ...]
+
+Prints information about one or more domains. If no domains are
+specified it prints out information about all domains.
+
+
+B<OPTIONS>
+
+=over 4
+
+=item B<-l>, B<--long>
+
+The output for B<xl list> is not the table view shown below, but
+instead presents the data in SXP compatible format.
+
+=item B<-Z>, B<--context>
+Also prints the security labels.
+
+=item B<-v>, B<--verbose>
+
+Also prints the domain UUIDs, the shutdown reason and security labels.
+
+=back
+
+B<EXAMPLE>
+
+An example format for the list is as follows:
+
+ Name ID Mem VCPUs State
Time(s)
+ Domain-0 0 750 4 r-----
11794.3
+ win 1 1019 1 r-----
0.3
+ linux 2 2048 2 r-----
5624.2
+
+Name is the name of the domain. ID the numeric domain id. Mem is the
+desired amount of memory to allocate to the domain (although it may
+not be the currently allocated amount). VCPUs is the number of
+virtual CPUs allocated to the domain. State is the run state (see
+below). Time is the total run time of the domain as accounted for by
+Xen.
+
+B<STATES>
+
+The State field lists 6 states for a Xen domain, and which ones the
+current domain is in.
+
+=over 4
+
+=item B<r - running>
+
+The domain is currently running on a CPU.
+
+=item B<b - blocked>
+
+The domain is blocked, and not running or runnable. This can be caused
+because the domain is waiting on IO (a traditional wait state) or has
+gone to sleep because there was nothing else for it to do.
+
+=item B<p - paused>
+
+The domain has been paused, usually occurring through the administrator
+running B<xl pause>. When in a paused state the domain will still
+consume allocated resources like memory, but will not be eligible for
+scheduling by the Xen hypervisor.
+
+=item B<s - shutdown>
+
+FIXME: Why would you ever see this state?
+
+=item B<c - crashed>
+
+The domain has crashed, which is always a violent ending. Usually
+this state can only occur if the domain has been configured not to
+restart on crash. See L<xldomain.cfg> for more info.
+
+=item B<d - dying>
+
+The domain is in process of dying, but hasn't completely shutdown or
+crashed.
+
+FIXME: Is this right?
+
+=back
+
+B<NOTES>
+
+=over 4
+
+The Time column is deceptive. Virtual IO (network and block devices)
+used by domains requires coordination by Domain0, which means that
+Domain0 is actually charged for much of the time that a DomainU is
+doing IO. Use of this time value to determine relative utilizations
+by domains is thus very suspect, as a high IO workload may show as
+less utilized than a high CPU workload. Consider yourself warned.
+
+=back
+
+=item B<mem-max> I<domain-id> I<mem>
+
+Specify the maximum amount of memory the domain is able to use, appending 't'
+for terabytes, 'g' for gigabytes, 'm' for megabytes, 'k' for kilobytes and 'b'
+for bytes.
+
+The mem-max value may not correspond to the actual memory used in the
+domain, as it may balloon down its memory to give more back to the OS.
+
+=item B<mem-set> I<domain-id> I<mem>
+
+Set the domain's used memory using the balloon driver; append 't' for
+terabytes, 'g' for gigabytes, 'm' for megabytes, 'k' for kilobytes and 'b' for
+bytes.
+
+Because this operation requires cooperation from the domain operating
+system, there is no guarantee that it will succeed. This command will
+definitely not work unless the domain has the required paravirt
+driver.
+
+B<Warning:> There is no good way to know in advance how small of a
+mem-set will make a domain unstable and cause it to crash. Be very
+careful when using this command on running domains.
+
+=item B<migrate> [I<OPTIONS>] I<domain-id> I<host>
+
+Migrate a domain to another host machine. By default B<xl> relies on ssh as a
+transport mechanism between the two hosts.
+
+B<OPTIONS>
+
+=over 4
+
+=item B<-s> I<sshcommand>
+
+Use <sshcommand> instead of ssh. String will be passed to sh. If empty, run
+<host> instead of ssh <host> xl migrate-receive [-d -e].
+
+=item B<-e>
+
+On the new host, do not wait in the background (on <host>) for the death of the
+domain.
+
+=item B<-C> I<config>
+
+Send <config> instead of config file from creation.
+
+=back
+
+=item B<pause> I<domain-id>
+
+Pause a domain. When in a paused state the domain will still consume
+allocated resources such as memory, but will not be eligible for
+scheduling by the Xen hypervisor.
+
+=item B<reboot> [I<OPTIONS>] I<domain-id>
+
+Reboot a domain. This acts just as if the domain had the B<reboot>
+command run from the console. The command returns as soon as it has
+executed the reboot action, which may be significantly before the
+domain actually reboots.
+
+The behavior of what happens to a domain when it reboots is set by the
+B<on_reboot> parameter of the xldomain.cfg file when the domain was
+created.
+
+=item B<restore> [I<OPTIONS>] [I<ConfigFile>] I<CheckpointFile>
+
+Build a domain from an B<xl save> state file. See B<save> for more info.
+
+B<OPTIONS>
+
+=over 4
+
+=item B<-p>
+
+Do not unpause domain after restoring it.
+
+=item B<-e>
+
+Do not wait in the background for the death of the domain on the new host.
+
+=item B<-d>
+
+Enable debug messages.
+
+=back
+
+=item B<save> [I<OPTIONS>] I<domain-id> I<CheckpointFile> [I<ConfigFile>]
+
+Saves a running domain to a state file so that it can be restored
+later. Once saved, the domain will no longer be running on the
+system, unless the -c option is used.
+B<xl restore> restores from this checkpoint file.
+Passing a config file argument allows the user to manually select the VM config
+file used to create the domain.
+
+
+=over 4
+
+=item B<-c>
+
+Leave domain running after creating the snapshot.
+
+=back
+
+
+=item B<shutdown> [I<OPTIONS>] I<domain-id>
+
+Gracefully shuts down a domain. This coordinates with the domain OS
+to perform graceful shutdown, so there is no guarantee that it will
+succeed, and may take a variable length of time depending on what
+services must be shutdown in the domain. The command returns
+immediately after signally the domain unless that B<-w> flag is used.
+
+The behavior of what happens to a domain when it reboots is set by the
+B<on_shutdown> parameter of the xldomain.cfg file when the domain was
+created.
+
+B<OPTIONS>
+
+=over 4
+
+=item B<-w>
+
+Wait for the domain to complete shutdown before returning.
+
+=back
+
+=item B<sysrq> I<domain-id> I<letter>
+
+Send a I<Magic System Request> signal to the domain. For more
+information on available magic sys req operations, see sysrq.txt in
+your Linux Kernel sources.
+
+=item B<unpause> I<domain-id>
+
+Moves a domain out of the paused state. This will allow a previously
+paused domain to now be eligible for scheduling by the Xen hypervisor.
+
+=item B<vcpu-set> I<domain-id> I<vcpu-count>
+
+Enables the I<vcpu-count> virtual CPUs for the domain in question.
+Like mem-set, this command can only allocate up to the maximum virtual
+CPU count configured at boot for the domain.
+
+If the I<vcpu-count> is smaller than the current number of active
+VCPUs, the highest number VCPUs will be hotplug removed. This may be
+important for pinning purposes.
+
+Attempting to set the VCPUs to a number larger than the initially
+configured VCPU count is an error. Trying to set VCPUs to < 1 will be
+quietly ignored.
+
+Because this operation requires cooperation from the domain operating
+system, there is no guarantee that it will succeed. This command will
+not work with a full virt domain.
+
+=item B<vcpu-list> [I<domain-id>]
+
+Lists VCPU information for a specific domain. If no domain is
+specified, VCPU information for all domains will be provided.
+
+=item B<vcpu-pin> I<domain-id> I<vcpu> I<cpus>
+
+Pins the VCPU to only run on the specific CPUs. The keyword
+B<all> can be used to apply the I<cpus> list to all VCPUs in the
+domain.
+
+Normally VCPUs can float between available CPUs whenever Xen deems a
+different run state is appropriate. Pinning can be used to restrict
+this, by ensuring certain VCPUs can only run on certain physical
+CPUs.
+
+=item B<button-press> I<domain-id> I<button>
+
+Indicate an ACPI button press to the domain. I<button> is may be 'power' or
+'sleep'.
+
+=item B<trigger> I<domain-id> I<nmi|reset|init|power|sleep> [I<VCPU>]
+
+Send a trigger to a domain, where the trigger can be: nmi, reset, init, power
+or sleep. Optionally a specific vcpu number can be passed as an argument.
+
+=item B<getenforce>
+
+Returns the current enforcing mode of the Flask Xen security module.
+
+=item B<setenforce> I<1|0|Enforcing|Permissive>
+
+Sets the current enforcing mode of the Flask Xen security module
+
+=item B<loadpolicy> I<policyfile>
+
+Loads a new policy int the Flask Xen security module.
+
+=back
+
+=head1 XEN HOST SUBCOMMANDS
+
+=over 4
+
+=item B<debug-keys> I<keys>
+
+Send debug I<keys> to Xen.
+
+=item B<dmesg> [B<-c>]
+
+Reads the Xen message buffer, similar to dmesg on a Linux system. The
+buffer contains informational, warning, and error messages created
+during Xen's boot process. If you are having problems with Xen, this
+is one of the first places to look as part of problem determination.
+
+B<OPTIONS>
+
+=over 4
+
+=item B<-c>, B<--clear>
+
+Clears Xen's message buffer.
+
+=back
+
+=item B<info> [B<-n>, B<--numa>]
+
+Print information about the Xen host in I<name : value> format. When
+reporting a Xen bug, please provide this information as part of the
+bug report.
+
+Sample output looks as follows (lines wrapped manually to make the man
+page more readable):
+
+ host : talon
+ release : 2.6.12.6-xen0
+ version : #1 Mon Nov 14 14:26:26 EST 2005
+ machine : i686
+ nr_cpus : 2
+ nr_nodes : 1
+ cores_per_socket : 1
+ threads_per_core : 1
+ cpu_mhz : 696
+ hw_caps : 0383fbff:00000000:00000000:00000040
+ total_memory : 767
+ free_memory : 37
+ xen_major : 3
+ xen_minor : 0
+ xen_extra : -devel
+ xen_caps : xen-3.0-x86_32
+ xen_scheduler : credit
+ xen_pagesize : 4096
+ platform_params : virt_start=0xfc000000
+ xen_changeset : Mon Nov 14 18:13:38 2005 +0100
+ 7793:090e44133d40
+ cc_compiler : gcc version 3.4.3 (Mandrakelinux
+ 10.2 3.4.3-7mdk)
+ cc_compile_by : sdague
+ cc_compile_domain : (none)
+ cc_compile_date : Mon Nov 14 14:16:48 EST 2005
+ xend_config_format : 4
+
+B<FIELDS>
+
+Not all fields will be explained here, but some of the less obvious
+ones deserve explanation:
+
+=over 4
+
+=item B<hw_caps>
+
+A vector showing what hardware capabilities are supported by your
+processor. This is equivalent to, though more cryptic, the flags
+field in /proc/cpuinfo on a normal Linux machine.
+
+=item B<free_memory>
+
+Available memory (in MB) not allocated to Xen, or any other domains.
+
+=item B<xen_caps>
+
+The Xen version and architecture. Architecture values can be one of:
+x86_32, x86_32p (i.e. PAE enabled), x86_64, ia64.
+
+=item B<xen_changeset>
+
+The Xen mercurial changeset id. Very useful for determining exactly
+what version of code your Xen system was built from.
+
+=back
+
+B<OPTIONS>
+
+=over 4
+
+=item B<-n>, B<--numa>
+
+List host NUMA topology information
+
+=back
+
+=item B<top>
+
+Executes the B<xentop> command, which provides real time monitoring of
+domains. Xentop is a curses interface, and reasonably self
+explanatory.
+
+=item B<uptime>
+
+Prints the current uptime of the domains running.
+
+=item B<pci-list-assignable-devices>
+
+List all the assignable PCI devices.
+
+=back
+
+=head1 SCHEDULER SUBCOMMANDS
+
+Xen ships with a number of domain schedulers, which can be set at boot
+time with the B<sched=> parameter on the Xen command line. By
+default B<credit> is used for scheduling.
+
+=over 4
+
+=item B<sched-credit> [ B<-d> I<domain-id> [ B<-w>[B<=>I<WEIGHT>] |
B<-c>[B<=>I<CAP>] ] ]
+
+Set credit scheduler parameters. The credit scheduler is a
+proportional fair share CPU scheduler built from the ground up to be
+work conserving on SMP hosts.
+
+Each domain (including Domain0) is assigned a weight and a cap.
+
+B<PARAMETERS>
+
+=over 4
+
+=item I<WEIGHT>
+
+A domain with a weight of 512 will get twice as much CPU as a domain
+with a weight of 256 on a contended host. Legal weights range from 1
+to 65535 and the default is 256.
+
+=item I<CAP>
+
+The cap optionally fixes the maximum amount of CPU a domain will be
+able to consume, even if the host system has idle CPU cycles. The cap
+is expressed in percentage of one physical CPU: 100 is 1 physical CPU,
+50 is half a CPU, 400 is 4 CPUs, etc. The default, 0, means there is
+no upper cap.
+
+=back
+
+=back
+
+=head1 CPUPOOLS COMMANDS
+
+Xen can group the physical cpus of a server in cpu-pools. Each physical CPU is
+assigned at most to one cpu-pool. Domains are each restricted to a single
+cpu-pool. Scheduling does not cross cpu-pool boundaries, so each cpu-pool has
+an own scheduler.
+Physical cpus and domains can be moved from one pool to another only by an
+explicit command.
+
+=over 4
+
+=item B<cpupool-create> [I<OPTIONS>] I<ConfigFile>
+
+Create a cpu pool based an I<ConfigFile>.
+
+B<OPTIONS>
+
+=over 4
+
+=item B<-f=FILE>, B<--defconfig=FILE>
+
+Use the given configuration file.
+
+=item B<-n>, B<--dryrun>
+
+Dry run - prints the resulting configuration.
+
+=back
+
+=item B<cpupool-list> [I<-c|--cpus> I<cpu-pool>]
+
+List CPU pools on the host.
+If I<-c> is specified, B<xl> prints a list of CPUs used by I<cpu-pool>.
+
+=item B<cpupool-destroy> I<cpu-pool>
+
+Deactivates a cpu pool.
+
+=item B<cpupool-rename> I<cpu-pool> <newname>
+
+Renames a cpu pool to I<newname>.
+
+=item B<cpupool-cpu-add> I<cpu-pool> I<cpu-nr|node-nr>
+
+Adds a cpu or a numa node to a cpu pool.
+
+=item B<cpupool-cpu-remove> I<cpu-nr|node-nr>
+
+Removes a cpu or a numa node from a cpu pool.
+
+=item B<cpupool-migrate> I<domain-id> I<cpu-pool>
+
+Moves a domain into a cpu pool.
+
+=item B<cpupool-numa-split>
+
+Splits up the machine into one cpu pool per numa node.
+
+=back
+
+=head1 VIRTUAL DEVICE COMMANDS
+
+Most virtual devices can be added and removed while guests are
+running. The effect to the guest OS is much the same as any hotplug
+event.
+
+=head2 BLOCK DEVICES
+
+=over 4
+
+=item B<block-attach> I<domain-id> I<disc-spec-component(s)> ...
+
+Create a new virtual block device. This will trigger a hotplug event
+for the guest.
+
+B<OPTIONS>
+
+=over 4
+
+=item I<domain-id>
+
+The domain id of the guest domain that the device will be attached to.
+
+=item I<disc-spec-component>
+
+A disc specification in the same format used for the B<disk> variable in
+the domain config file. See L<xldomain.cfg>.
+
+=back
+
+=item B<block-detach> I<domain-id> I<devid> [B<--force>]
+
+Detach a domain's virtual block device. I<devid> may be the symbolic
+name or the numeric device id given to the device by domain 0. You
+will need to run B<xl block-list> to determine that number.
+
+Detaching the device requires the cooperation of the domain. If the
+domain fails to release the device (perhaps because the domain is hung
+or is still using the device), the detach will fail. The B<--force>
+parameter will forcefully detach the device, but may cause IO errors
+in the domain.
+
+=item B<block-list> I<domain-id>
+
+List virtual block devices for a domain.
+
+=item B<cd-insert> I<domain-id> I<VirtualDevice> I<be-dev>
+
+Insert a cdrom into a guest domain's cd drive. Only works with HVM domains.
+
+B<OPTIONS>
+
+=over 4
+
+=item I<VirtualDevice>
+
+How the device should be presented to the guest domain; for example /dev/hdc.
+
+=item I<be-dev>
+
+the device in the backend domain (usually domain 0) to be exported; it can be a
+path to a file (file://path/to/file.iso). See B<disk> in L<xldomain.cfg> for
the
+details.
+
+=back
+
+=item B<cd-eject> I<domain-id> I<VirtualDevice>
+
+Eject a cdrom from a guest's cd drive. Only works with HVM domains.
+I<VirtualDevice> is the cdrom device in the guest to eject.
+
+=back
+
+=head2 NETWORK DEVICES
+
+=over 4
+
+=item B<network-attach> I<domain-id> I<network-device>
+
+Creates a new network device in the domain specified by I<domain-id>.
+I<network-device> describes the device to attach, using the same format as the
+B<vif> string in the domain config file. See L<xldomain.cfg> for the
+description.
+
+=item B<network-detach> I<domain-id> I<devid|mac>
+
+Removes the network device from the domain specified by I<domain-id>.
+I<devid> is the virtual interface device number within the domain
+(i.e. the 3 in vif22.3). Alternatively the I<mac> address can be used to
+select the virtual interface to detach.
+
+=item B<network-list> I<domain-id>
+
+List virtual network interfaces for a domain.
+
+=back
+
+=head2 PCI PASS-THROUGH
+
+=over 4
+
+=item B<pci-attach> I<domain-id> I<BDF>
+
+Hot-plug a new pass-through pci device to the specified domain.
+B<BDF> is the PCI Bus/Device/Function of the physical device to pass-through.
+
+=item B<pci-detach> [I<-f>] I<domain-id> I<BDF>
+
+Hot-unplug a previously assigned pci device from a domain. B<BDF> is the PCI
+Bus/Device/Function of the physical device to be removed from the guest domain.
+
+If B<-f> is specified, B<xl> is going to forcefully remove the device even
+without guest's collaboration.
+
+=item B<pci-list> I<domain-id>
+
+List pass-through pci devices for a domain.
+
+=back
+
+=head1 SEE ALSO
+
+B<xldomain.cfg>(5), B<xentop>(1)
+
+=head1 AUTHOR
+
+ Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>
+ Vincent Hanquez <vincent.hanquez@xxxxxxxxxxxxx>
+ Ian Jackson <ian.jackson@xxxxxxxxxxxxx>
+ Ian Campbell <Ian.Campbell@xxxxxxxxxx>
+
+=head1 BUGS
+
+Send bugs to xen-devel@xxxxxxxxxxxxxxxxxxxx
_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog
|
Home