# HG changeset patch
# User Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
# Date 1310632272 -3600
# Node ID cf7e1746bdb7cb0f35b1df835096d9979312f8f4
# Parent f1f677d3f2583132484866a78b92f4a326560bc7
xen: Update pci_uart_config to save the BAR1 contents if com2 is used
Jan Beulich pointed out that the pci_uart_config can be called for
com2 and we should probe the second BAR instead of the first one.
This patch will probe the BAR0 if it is com1, and BAR1 if its com2.
It also cleans up some of the whitespace problems and changes the
name of the parameter and function from 'magic' to 'pci'.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
---
diff -r f1f677d3f258 -r cf7e1746bdb7 xen/drivers/char/ns16550.c
--- a/xen/drivers/char/ns16550.c Thu Jul 14 09:30:25 2011 +0100
+++ b/xen/drivers/char/ns16550.c Thu Jul 14 09:31:12 2011 +0100
@@ -49,7 +49,7 @@
unsigned int ps_bdf[3]; /* pci serial port BDF */
bool_t pb_bdf_enable; /* if =1, pb-bdf effective, port behind bridge */
bool_t ps_bdf_enable; /* if =1, ps_bdf effective, port on pci card */
- int bar0, cr;
+ int bar, cr, bar_idx;
} ns16550_com[2] = { { 0 } };
/* Register offsets */
@@ -337,9 +337,10 @@
stop_timer(&uart->timer);
- if (uart->bar0) {
- uart->bar0 = pci_conf_read32(uart->pb_bdf[0], uart->pb_bdf[1],
uart->pb_bdf[2],
- PCI_BASE_ADDRESS_0);
+ if (uart->bar) {
+ uart->bar = pci_conf_read32(uart->pb_bdf[0], uart->pb_bdf[1],
uart->pb_bdf[2],
+ PCI_BASE_ADDRESS_0 +
+ (sizeof(uint32_t) * uart->bar_idx));
uart->cr = pci_conf_read32(uart->pb_bdf[0], uart->pb_bdf[1],
uart->pb_bdf[2],
PCI_COMMAND);
}
@@ -352,9 +353,10 @@
ns16550_setup_preirq(port->uart);
ns16550_setup_postirq(port->uart);
- if (uart->bar0) {
+ if (uart->bar) {
pci_conf_write32(uart->pb_bdf[0], uart->pb_bdf[1], uart->pb_bdf[2],
- PCI_BASE_ADDRESS_0, uart->bar0);
+ PCI_BASE_ADDRESS_0 + sizeof(uint32_t) * uart->bar_idx,
+ uart->bar);
pci_conf_write32(uart->pb_bdf[0], uart->pb_bdf[1], uart->pb_bdf[2],
PCI_COMMAND, uart->cr);
}
@@ -461,37 +463,40 @@
}
static int
-magic_uart_config (struct ns16550 *uart,int skip_amt)
+pci_uart_config (struct ns16550 *uart, int skip_amt, int bar_idx)
{
uint16_t class;
- uint32_t bar0, len;
+ uint32_t bar, len;
int b, d, f;
/*Skanky hack - start at bus 1 to avoid AMT, a plug in card cannot be on bus 1
*/
- if (skip_amt) b=1;
- else b=0;
+ if (skip_amt)
+ b=1;
+ else
+ b=0;
for (; b < 0x100; ++b)
+ {
+ for (d = 0; d < 0x20; ++d)
{
- for (d = 0; d < 0x20; ++d)
- {
for (f = 0; f < 0x8; ++f)
- {
-
+ {
class = pci_conf_read16 (b, d, f, PCI_CLASS_DEVICE);
if (class != 0x700)
continue;;
- bar0 = pci_conf_read32 (b, d, f, PCI_BASE_ADDRESS_0);
+ bar = pci_conf_read32 (b, d, f, PCI_BASE_ADDRESS_0 +
+ (sizeof(uint32_t) * bar_idx));
/* Not IO */
- if (!(bar0 & 1))
+ if (!(bar & 1))
continue;
pci_conf_write32 (b, d, f, PCI_BASE_ADDRESS_0, 0xffffffff);
len = pci_conf_read32 (b, d, f, PCI_BASE_ADDRESS_0);
- pci_conf_write32 (b, d, f, PCI_BASE_ADDRESS_0, bar0);
+ pci_conf_write32 (b, d, f, PCI_BASE_ADDRESS_0 +
+ (sizeof(uint32_t) * bar_idx), bar);
/* Not 8 bytes */
if ((len & 0xffff) != 0xfff9)
@@ -500,8 +505,9 @@
uart->pb_bdf[0] = b;
uart->pb_bdf[1] = d;
uart->pb_bdf[2] = f;
- uart->bar0 = bar0;
- uart->io_base = bar0 & 0xfffe;
+ uart->bar = bar;
+ uart->bar_idx = bar_idx;
+ uart->io_base = bar & 0xfffe;
uart->irq = 0;
return 0;
@@ -570,15 +576,14 @@
if ( *conf == ',' )
{
conf++;
-
- if ( strncmp(conf,"magic",5) == 0 ) {
- if (magic_uart_config(uart,1))
- return;
- conf+=5;
- } else if ( strncmp(conf,"amt",3) == 0 ) {
- if (magic_uart_config(uart,0))
- return;
- conf+=3;
+ if ( strncmp(conf, "pci", 5) == 0 ) {
+ if (pci_uart_config(uart, 1/* skip AMT */, uart - ns16550_com))
+ return;
+ conf += 3;
+ } else if ( strncmp(conf, "amt", 3) == 0 ) {
+ if (pci_uart_config(uart, 0, uart - ns16550_com))
+ return;
+ conf += 3;
} else {
uart->io_base = simple_strtoul(conf, &conf, 0);
}
_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog
|
Home