# HG changeset patch
# User cl349@xxxxxxxxxxxxxxxxxxxx
# Node ID ff83b29ebe9a1eb4de6f30787e0f7c10e3d9230f
# Parent e9e319c61a1e62c499ebc3efa2a083b96121d46d
Add arch/i386/Kconfig.cpu to sparse tree.
Signed-off-by: Christian Limpach <Christian.Limpach@xxxxxxxxxxxx>
diff -r e9e319c61a1e -r ff83b29ebe9a linux-2.6-xen-sparse/arch/i386/Kconfig.cpu
--- /dev/null Mon Feb 20 17:14:19 2006
+++ b/linux-2.6-xen-sparse/arch/i386/Kconfig.cpu Mon Feb 20 17:15:14 2006
@@ -0,0 +1,315 @@
+# Put here option for CPU selection and depending optimization
+if !X86_ELAN
+
+choice
+ prompt "Processor family"
+ default M686
+
+config M386
+ bool "386"
+ ---help---
+ This is the processor type of your CPU. This information is used for
+ optimizing purposes. In order to compile a kernel that can run on
+ all x86 CPU types (albeit not optimally fast), you can specify
+ "386" here.
+
+ The kernel will not necessarily run on earlier architectures than
+ the one you have chosen, e.g. a Pentium optimized kernel will run on
+ a PPro, but not necessarily on a i486.
+
+ Here are the settings recommended for greatest speed:
+ - "386" for the AMD/Cyrix/Intel 386DX/DXL/SL/SLC/SX, Cyrix/TI
+ 486DLC/DLC2, UMC 486SX-S and NexGen Nx586. Only "386" kernels
+ will run on a 386 class machine.
+ - "486" for the AMD/Cyrix/IBM/Intel 486DX/DX2/DX4 or
+ SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S.
+ - "586" for generic Pentium CPUs lacking the TSC
+ (time stamp counter) register.
+ - "Pentium-Classic" for the Intel Pentium.
+ - "Pentium-MMX" for the Intel Pentium MMX.
+ - "Pentium-Pro" for the Intel Pentium Pro.
+ - "Pentium-II" for the Intel Pentium II or pre-Coppermine Celeron.
+ - "Pentium-III" for the Intel Pentium III or Coppermine Celeron.
+ - "Pentium-4" for the Intel Pentium 4 or P4-based Celeron.
+ - "K6" for the AMD K6, K6-II and K6-III (aka K6-3D).
+ - "Athlon" for the AMD K7 family (Athlon/Duron/Thunderbird).
+ - "Crusoe" for the Transmeta Crusoe series.
+ - "Efficeon" for the Transmeta Efficeon series.
+ - "Winchip-C6" for original IDT Winchip.
+ - "Winchip-2" for IDT Winchip 2.
+ - "Winchip-2A" for IDT Winchips with 3dNow! capabilities.
+ - "GeodeGX1" for Geode GX1 (Cyrix MediaGX).
+ - "Geode GX/LX" For AMD Geode GX and LX processors.
+ - "CyrixIII/VIA C3" for VIA Cyrix III or VIA C3.
+ - "VIA C3-2 for VIA C3-2 "Nehemiah" (model 9 and above).
+
+ If you don't know what to do, choose "386".
+
+config M486
+ bool "486"
+ help
+ Select this for a 486 series processor, either Intel or one of the
+ compatible processors from AMD, Cyrix, IBM, or Intel. Includes DX,
+ DX2, and DX4 variants; also SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or
+ U5S.
+
+config M586
+ bool "586/K5/5x86/6x86/6x86MX"
+ help
+ Select this for an 586 or 686 series processor such as the AMD K5,
+ the Cyrix 5x86, 6x86 and 6x86MX. This choice does not
+ assume the RDTSC (Read Time Stamp Counter) instruction.
+
+config M586TSC
+ bool "Pentium-Classic"
+ help
+ Select this for a Pentium Classic processor with the RDTSC (Read
+ Time Stamp Counter) instruction for benchmarking.
+
+config M586MMX
+ bool "Pentium-MMX"
+ help
+ Select this for a Pentium with the MMX graphics/multimedia
+ extended instructions.
+
+config M686
+ bool "Pentium-Pro"
+ help
+ Select this for Intel Pentium Pro chips. This enables the use of
+ Pentium Pro extended instructions, and disables the init-time guard
+ against the f00f bug found in earlier Pentiums.
+
+config MPENTIUMII
+ bool "Pentium-II/Celeron(pre-Coppermine)"
+ help
+ Select this for Intel chips based on the Pentium-II and
+ pre-Coppermine Celeron core. This option enables an unaligned
+ copy optimization, compiles the kernel with optimization flags
+ tailored for the chip, and applies any applicable Pentium Pro
+ optimizations.
+
+config MPENTIUMIII
+ bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon"
+ help
+ Select this for Intel chips based on the Pentium-III and
+ Celeron-Coppermine core. This option enables use of some
+ extended prefetch instructions in addition to the Pentium II
+ extensions.
+
+config MPENTIUMM
+ bool "Pentium M"
+ help
+ Select this for Intel Pentium M (not Pentium-4 M)
+ notebook chips.
+
+config MPENTIUM4
+ bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/Xeon"
+ help
+ Select this for Intel Pentium 4 chips. This includes the
+ Pentium 4, P4-based Celeron and Xeon, and Pentium-4 M
+ (not Pentium M) chips. This option enables compile flags
+ optimized for the chip, uses the correct cache shift, and
+ applies any applicable Pentium III optimizations.
+
+config MK6
+ bool "K6/K6-II/K6-III"
+ help
+ Select this for an AMD K6-family processor. Enables use of
+ some extended instructions, and passes appropriate optimization
+ flags to GCC.
+
+config MK7
+ bool "Athlon/Duron/K7"
+ help
+ Select this for an AMD Athlon K7-family processor. Enables use of
+ some extended instructions, and passes appropriate optimization
+ flags to GCC.
+
+config MK8
+ bool "Opteron/Athlon64/Hammer/K8"
+ help
+ Select this for an AMD Opteron or Athlon64 Hammer-family processor.
Enables
+ use of some extended instructions, and passes appropriate optimization
+ flags to GCC.
+
+config MCRUSOE
+ bool "Crusoe"
+ help
+ Select this for a Transmeta Crusoe processor. Treats the processor
+ like a 586 with TSC, and sets some GCC optimization flags (like a
+ Pentium Pro with no alignment requirements).
+
+config MEFFICEON
+ bool "Efficeon"
+ help
+ Select this for a Transmeta Efficeon processor.
+
+config MWINCHIPC6
+ bool "Winchip-C6"
+ help
+ Select this for an IDT Winchip C6 chip. Linux and GCC
+ treat this chip as a 586TSC with some extended instructions
+ and alignment requirements.
+
+config MWINCHIP2
+ bool "Winchip-2"
+ help
+ Select this for an IDT Winchip-2. Linux and GCC
+ treat this chip as a 586TSC with some extended instructions
+ and alignment requirements.
+
+config MWINCHIP3D
+ bool "Winchip-2A/Winchip-3"
+ help
+ Select this for an IDT Winchip-2A or 3. Linux and GCC
+ treat this chip as a 586TSC with some extended instructions
+ and alignment reqirements. Also enable out of order memory
+ stores for this CPU, which can increase performance of some
+ operations.
+
+config MGEODEGX1
+ bool "GeodeGX1"
+ help
+ Select this for a Geode GX1 (Cyrix MediaGX) chip.
+
+config MGEODE_LX
+ bool "Geode GX/LX"
+ help
+ Select this for AMD Geode GX and LX processors.
+
+config MCYRIXIII
+ bool "CyrixIII/VIA-C3"
+ help
+ Select this for a Cyrix III or C3 chip. Presently Linux and GCC
+ treat this chip as a generic 586. Whilst the CPU is 686 class,
+ it lacks the cmov extension which gcc assumes is present when
+ generating 686 code.
+ Note that Nehemiah (Model 9) and above will not boot with this
+ kernel due to them lacking the 3DNow! instructions used in earlier
+ incarnations of the CPU.
+
+config MVIAC3_2
+ bool "VIA C3-2 (Nehemiah)"
+ help
+ Select this for a VIA C3 "Nehemiah". Selecting this enables usage
+ of SSE and tells gcc to treat the CPU as a 686.
+ Note, this kernel will not boot on older (pre model 9) C3s.
+
+endchoice
+
+config X86_GENERIC
+ bool "Generic x86 support"
+ help
+ Instead of just including optimizations for the selected
+ x86 variant (e.g. PII, Crusoe or Athlon), include some more
+ generic optimizations as well. This will make the kernel
+ perform better on x86 CPUs other than that selected.
+
+ This is really intended for distributors who need more
+ generic optimizations.
+
+endif
+
+#
+# Define implied options from the CPU selection here
+#
+config X86_CMPXCHG
+ bool
+ depends on !M386
+ default y
+
+config X86_XADD
+ bool
+ depends on !M386
+ default y
+
+config X86_L1_CACHE_SHIFT
+ int
+ default "7" if MPENTIUM4 || X86_GENERIC
+ default "4" if X86_ELAN || M486 || M386 || MGEODEGX1
+ default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE ||
MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX
|| M586TSC || M586 || MVIAC3_2 || MGEODE_LX
+ default "6" if MK7 || MK8 || MPENTIUMM
+
+config RWSEM_GENERIC_SPINLOCK
+ bool
+ depends on M386
+ default y
+
+config RWSEM_XCHGADD_ALGORITHM
+ bool
+ depends on !M386
+ default y
+
+config GENERIC_CALIBRATE_DELAY
+ bool
+ default y
+
+config X86_PPRO_FENCE
+ bool
+ depends on M686 || M586MMX || M586TSC || M586 || M486 || M386 ||
MGEODEGX1
+ default y
+
+config X86_F00F_BUG
+ bool
+ depends on M586MMX || M586TSC || M586 || M486 || M386
+ default y
+
+config X86_WP_WORKS_OK
+ bool
+ depends on !M386
+ default y
+
+config X86_INVLPG
+ bool
+ depends on !M386
+ default y
+
+config X86_BSWAP
+ bool
+ depends on !M386
+ default y
+
+config X86_POPAD_OK
+ bool
+ depends on !M386
+ default y
+
+config X86_CMPXCHG64
+ bool
+ depends on !M386 && !M486
+ default y
+
+config X86_ALIGNMENT_16
+ bool
+ depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII ||
X86_ELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1
+ default y
+
+config X86_GOOD_APIC
+ bool
+ depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII
|| M686 || M586MMX || MK8 || MEFFICEON
+ default y
+
+config X86_INTEL_USERCOPY
+ bool
+ depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII ||
M586MMX || X86_GENERIC || MK8 || MK7 || MEFFICEON
+ default y
+
+config X86_USE_PPRO_CHECKSUM
+ bool
+ depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || MK7 ||
MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 ||
MVIAC3_2 || MEFFICEON || MGEODE_LX
+ default y
+
+config X86_USE_3DNOW
+ bool
+ depends on MCYRIXIII || MK7 || MGEODE_LX
+ default y
+
+config X86_OOSTORE
+ bool
+ depends on (MWINCHIP3D || MWINCHIP2 || MWINCHIPC6) && MTRR
+ default y
+
+config X86_TSC
+ bool
+ depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON ||
MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII
|| M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MGEODEGX1) && !X86_NUMAQ
+ default y
_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog
|
Home