[Xen-changelog] First stab at a xend-config.sxp man page.

[Xen patchbot -unstable <patchbot-unstable@xxxxxxxxxxxxxxxxxxx>]

# HG changeset patch
# User dan@xxxxxxxxxxxxxxxxxxxxx
# Node ID 1e3042a9390442269395c0171923ddba77ef3c45
# Parent  5c954929bb0d9ecafc144c433b68e7d65a9e5453
First stab at a xend-config.sxp man page.

diff -r 5c954929bb0d -r 1e3042a93904 docs/man/xend-config.sxp.pod.5
--- /dev/null   Fri Nov 18 15:32:04 2005
+++ b/docs/man/xend-config.sxp.pod.5    Sun Nov 20 14:01:15 2005
@@ -0,0 +1,142 @@
+=head1 NAME
+
+xend-config.sxp - Xen daemon configuration file
+
+=head1 SYNOPSIS
+
+/etc/xen/xend-config.sxp
+
+=head1 DESCRIPTION
+
+The xend(1) program requires xend-config.sxp to specify operating
+parameters which determine the behavior of the daemon at runtime.
+
+The parameters are specified in S-expression format.  See the example
+configuration file in I</etc/xen/xend-config.sxp> for details.
+
+=head1 OPTIONS
+
+The following lists the daemon configuration parameters:
+
+=over 4
+
+=item I<logfile>
+
+The location of the file to record runtime log messages.  Defaults to
+I</var/log/xend.log>.
+
+=item I<loglevel>
+
+Filters out messages below the specified level.  Possible values are
+DEBUG, INFO, WARNING, ERROR, CRITICAL.  Defaults to I<DEBUG>.
+
+=item I<xend-http-server>
+
+A boolean value that tells xend whether or not to start the http
+stream socket management server.  Defaults to I<no>.
+
+=item I<xend-unix-server>
+
+A boolean value that tells xend whether or not to start the unix
+domain socket management server.  This is required for the CLI tools
+to operate.  Defaults to I<yes>.
+
+=item I<xend-relocation-server>
+
+A boolean value that tells xend whether or not to start the relocation
+server.  This is required for cross-machine migrations.  Defaults to
+I<no>.
+
+=item I<xend-unix-path>
+
+The location of the unix domain socket the xend-unix-server will use
+to communicate with the management tools.  Defaults to
+I</var/lib/xend/xend-socket>.
+
+=item I<xend-port>
+
+The port that will be used by the http management server.  Defaults to
+I<8000>.
+
+=item I<xend-relocation-port>
+
+The port that will be used by the relocation server.  Defaults to
+I<8002>.
+
+=item I<xend-address> 
+
+The address to which the http management server will bind.  Defaults
+to I<''> which means "all interfaces".
+
+=item I<xend-relocation-address>
+
+The address to which the relocation server will bind.  Defaults to
+I<''> which means "all interfaces".
+
+=item I<console-limit>
+
+The kilobyte buffer limit that will be enforced by the console server.
+This limit is set per-domain, and is needed to prevent a single domain
+from overwhelming the console server with massive amounts of data.
+Defaults to I<1024>.
+
+=item I<network-script>
+
+The name of the script in I</etc/xen/scripts> that will be run to
+setup the networking environment.  This can be any name, but in
+general is either I<network-bridge> or I<network-route>.
+
+=item I<vif-script>
+
+The name of the script in I</etc/xen/scripts> that will be run to
+setup a virtual interface when it is created or destroyed.  This needs
+to (in general) work in unison with the I<network-script>.
+
+=item I<dom0-min-mem>
+
+This specifies the minimum number of megabytes that will be reserved
+for Domain0.  If this value is positive, Domain0 will be automatically
+ballooned down to this limit to make space for new domains.  If this
+is set to 0, Domain0 will not be automatically ballooned.
+
+=item I<dom0-cpus>
+
+This specifies the number of CPUs that Domain0 will be allowed to use.
+If the value is 0, all available CPUs will be used by Domain0.
+
+=item I<enable-dump>
+
+A boolean value that tells xend whether or not core dumps of guest
+domains should be saved when a crash occurrs.  Defaults to I<no>.
+
+=back
+
+=head1 EXAMPLES
+
+An example configuration with relocation enabled for the local network:
+
+=over 4
+
+ (xend-relocation-server yes)
+ (xend-relocation-address 192.168.1.1)
+ (network-script network-bridge)
+ (vif-script vif-bridge)
+ (dom0-min-mem 0)
+ (dom0-cpus 0)
+
+=back
+
+=head1 CAVEATS
+
+Note that relocation is currently unsecured and is very dangerous if
+left enabled.  No authentication is performed, and very little sanity
+checking takes place.  Enable at your own risk.
+
+=head1 SEE ALSO
+
+B<xend>(1)
+
+=head1 AUTHOR
+
+Dan Smith <danms@xxxxxxxxxx>
+

_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog