# HG changeset patch
# User kaf24@xxxxxxxxxxxxxxxxxxxx
# Node ID 704e6cc4a6846229295b0d0d4fc84f19772bbb87
# Parent 6fc0b68b0a9ca2ab6164ee02db7fcf70905665f0
Remove dead files.
diff -r 6fc0b68b0a9c -r 704e6cc4a684
linux-2.6-xen-sparse/arch/xen/i386/kernel/timers/Makefile
--- a/linux-2.6-xen-sparse/arch/xen/i386/kernel/timers/Makefile Mon Aug 8
10:59:22 2005
+++ /dev/null Mon Aug 8 11:06:45 2005
@@ -1,17 +0,0 @@
-#
-# Makefile for x86 timers
-#
-
-XENARCH := $(subst ",,$(CONFIG_XENARCH))
-
-obj-y := timer_tsc.o
-c-obj-y :=
-
-c-link :=
-
-$(patsubst %.o,$(obj)/%.c,$(c-obj-y) $(c-link)):
- @ln -fsn $(srctree)/arch/i386/kernel/timers/$(notdir $@) $@
-
-obj-y += $(c-obj-y)
-
-clean-files += $(patsubst %.o,%.c,$(c-obj-y) $(c-obj-) $(c-link))
diff -r 6fc0b68b0a9c -r 704e6cc4a684
linux-2.6-xen-sparse/arch/xen/i386/kernel/timers/timer_tsc.c
--- a/linux-2.6-xen-sparse/arch/xen/i386/kernel/timers/timer_tsc.c Mon Aug
8 10:59:22 2005
+++ /dev/null Mon Aug 8 11:06:45 2005
@@ -1,379 +0,0 @@
-/*
- * This code largely moved from arch/i386/kernel/time.c.
- * See comments there for proper credits.
- */
-
-#include <linux/spinlock.h>
-#include <linux/init.h>
-#include <linux/timex.h>
-#include <linux/errno.h>
-#include <linux/cpufreq.h>
-#include <linux/string.h>
-#include <linux/jiffies.h>
-
-#include <asm/timer.h>
-#include <asm/io.h>
-/* processor.h for distable_tsc flag */
-#include <asm/processor.h>
-
-#include "io_ports.h"
-#include "mach_timer.h"
-
-#include <asm/hpet.h>
-
-#ifdef CONFIG_HPET_TIMER
-static unsigned long hpet_usec_quotient;
-static unsigned long hpet_last;
-static struct timer_opts timer_tsc;
-#endif
-
-static inline void cpufreq_delayed_get(void);
-
-int tsc_disable __initdata = 0;
-
-extern spinlock_t i8253_lock;
-
-static int use_tsc;
-
-static unsigned long long monotonic_base;
-static u32 monotonic_offset;
-static seqlock_t monotonic_lock = SEQLOCK_UNLOCKED;
-
-/* convert from cycles(64bits) => nanoseconds (64bits)
- * basic equation:
- * ns = cycles / (freq / ns_per_sec)
- * ns = cycles * (ns_per_sec / freq)
- * ns = cycles * (10^9 / (cpu_mhz * 10^6))
- * ns = cycles * (10^3 / cpu_mhz)
- *
- * Then we use scaling math (suggested by george@xxxxxxxxxx) to get:
- * ns = cycles * (10^3 * SC / cpu_mhz) / SC
- * ns = cycles * cyc2ns_scale / SC
- *
- * And since SC is a constant power of two, we can convert the div
- * into a shift.
- * -johnstul@xxxxxxxxxx "math is hard, lets go shopping!"
- */
-static unsigned long cyc2ns_scale;
-#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
-
-static inline void set_cyc2ns_scale(unsigned long cpu_mhz)
-{
- cyc2ns_scale = (1000 << CYC2NS_SCALE_FACTOR)/cpu_mhz;
-}
-
-static inline unsigned long long cycles_2_ns(unsigned long long cyc)
-{
- return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR;
-}
-
-/* Cached *multiplier* to convert TSC counts to microseconds.
- * (see the equation below).
- * Equal to 2^32 * (1 / (clocks per usec) ).
- * Initialized in time_init.
- */
-static unsigned long fast_gettimeoffset_quotient;
-
-extern u32 shadow_tsc_stamp;
-extern u64 shadow_system_time;
-
-static unsigned long get_offset_tsc(void)
-{
- register unsigned long eax, edx;
-
- /* Read the Time Stamp Counter */
-
- rdtsc(eax,edx);
-
- /* .. relative to previous jiffy (32 bits is enough) */
- eax -= shadow_tsc_stamp;
-
- /*
- * Time offset = (tsc_low delta) * fast_gettimeoffset_quotient
- * = (tsc_low delta) * (usecs_per_clock)
- * = (tsc_low delta) * (usecs_per_jiffy / clocks_per_jiffy)
- *
- * Using a mull instead of a divl saves up to 31 clock cycles
- * in the critical path.
- */
-
- __asm__("mull %2"
- :"=a" (eax), "=d" (edx)
- :"rm" (fast_gettimeoffset_quotient),
- "0" (eax));
-
- /* our adjusted time offset in microseconds */
- return edx;
-}
-
-static unsigned long long monotonic_clock_tsc(void)
-{
- unsigned long long last_offset, this_offset, base;
- unsigned seq;
-
- /* atomically read monotonic base & last_offset */
- do {
- seq = read_seqbegin(&monotonic_lock);
- last_offset = monotonic_offset;
- base = monotonic_base;
- } while (read_seqretry(&monotonic_lock, seq));
-
- /* Read the Time Stamp Counter */
- rdtscll(this_offset);
-
- /* return the value in ns */
- return base + cycles_2_ns(this_offset - last_offset);
-}
-
-/*
- * Scheduler clock - returns current time in nanosec units.
- */
-unsigned long long sched_clock(void)
-{
- unsigned long long this_offset;
-
- /*
- * In the NUMA case we dont use the TSC as they are not
- * synchronized across all CPUs.
- */
-#ifndef CONFIG_NUMA
- if (!use_tsc)
-#endif
- /* no locking but a rare wrong value is not a big deal */
- return jiffies_64 * (1000000000 / HZ);
-
- /* Read the Time Stamp Counter */
- rdtscll(this_offset);
-
- /* return the value in ns */
- return cycles_2_ns(this_offset);
-}
-
-
-static void mark_offset_tsc(void)
-{
-
- /* update the monotonic base value */
- write_seqlock(&monotonic_lock);
- monotonic_base = shadow_system_time;
- monotonic_offset = shadow_tsc_stamp;
- write_sequnlock(&monotonic_lock);
-}
-
-static void delay_tsc(unsigned long loops)
-{
- unsigned long bclock, now;
-
- rdtscl(bclock);
- do
- {
- rep_nop();
- rdtscl(now);
- } while ((now-bclock) < loops);
-}
-
-#ifdef CONFIG_HPET_TIMER
-static void mark_offset_tsc_hpet(void)
-{
- unsigned long long this_offset, last_offset;
- unsigned long offset, temp, hpet_current;
-
- write_seqlock(&monotonic_lock);
- last_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
- /*
- * It is important that these two operations happen almost at
- * the same time. We do the RDTSC stuff first, since it's
- * faster. To avoid any inconsistencies, we need interrupts
- * disabled locally.
- */
- /*
- * Interrupts are just disabled locally since the timer irq
- * has the SA_INTERRUPT flag set. -arca
- */
- /* read Pentium cycle counter */
-
- hpet_current = hpet_readl(HPET_COUNTER);
- rdtsc(last_tsc_low, last_tsc_high);
-
- /* lost tick compensation */
- offset = hpet_readl(HPET_T0_CMP) - hpet_tick;
- if (unlikely(((offset - hpet_last) > hpet_tick) && (hpet_last != 0))) {
- int lost_ticks = (offset - hpet_last) / hpet_tick;
- jiffies_64 += lost_ticks;
- }
- hpet_last = hpet_current;
-
- /* update the monotonic base value */
- this_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
- monotonic_base += cycles_2_ns(this_offset - last_offset);
- write_sequnlock(&monotonic_lock);
-
- /* calculate delay_at_last_interrupt */
- /*
- * Time offset = (hpet delta) * ( usecs per HPET clock )
- * = (hpet delta) * ( usecs per tick / HPET clocks per tick)
- * = (hpet delta) * ( hpet_usec_quotient ) / (2^32)
- * Where,
- * hpet_usec_quotient = (2^32 * usecs per tick)/HPET clocks per tick
- */
- delay_at_last_interrupt = hpet_current - offset;
- ASM_MUL64_REG(temp, delay_at_last_interrupt,
- hpet_usec_quotient, delay_at_last_interrupt);
-}
-#endif
-
-
-#ifdef CONFIG_CPU_FREQ
-#include <linux/workqueue.h>
-
-static unsigned int cpufreq_delayed_issched = 0;
-static unsigned int cpufreq_init = 0;
-static struct work_struct cpufreq_delayed_get_work;
-
-static void handle_cpufreq_delayed_get(void *v)
-{
- unsigned int cpu;
- for_each_online_cpu(cpu) {
- cpufreq_get(cpu);
- }
- cpufreq_delayed_issched = 0;
-}
-
-/* if we notice lost ticks, schedule a call to cpufreq_get() as it tries
- * to verify the CPU frequency the timing core thinks the CPU is running
- * at is still correct.
- */
-static inline void cpufreq_delayed_get(void)
-{
- if (cpufreq_init && !cpufreq_delayed_issched) {
- cpufreq_delayed_issched = 1;
- printk(KERN_DEBUG "Losing some ticks... checking if CPU
frequency changed.\n");
- schedule_work(&cpufreq_delayed_get_work);
- }
-}
-
-/* If the CPU frequency is scaled, TSC-based delays will need a different
- * loops_per_jiffy value to function properly.
- */
-
-static unsigned int ref_freq = 0;
-static unsigned long loops_per_jiffy_ref = 0;
-
-#ifndef CONFIG_SMP
-static unsigned long fast_gettimeoffset_ref = 0;
-static unsigned long cpu_khz_ref = 0;
-#endif
-
-static int
-time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
- void *data)
-{
- struct cpufreq_freqs *freq = data;
-
- if (val != CPUFREQ_RESUMECHANGE)
- write_seqlock_irq(&xtime_lock);
- if (!ref_freq) {
- ref_freq = freq->old;
- loops_per_jiffy_ref = cpu_data[freq->cpu].loops_per_jiffy;
-#ifndef CONFIG_SMP
- fast_gettimeoffset_ref = fast_gettimeoffset_quotient;
- cpu_khz_ref = cpu_khz;
-#endif
- }
-
- if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) ||
- (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) ||
- (val == CPUFREQ_RESUMECHANGE)) {
- if (!(freq->flags & CPUFREQ_CONST_LOOPS))
- cpu_data[freq->cpu].loops_per_jiffy =
cpufreq_scale(loops_per_jiffy_ref, ref_freq, freq->new);
-#ifndef CONFIG_SMP
- if (cpu_khz)
- cpu_khz = cpufreq_scale(cpu_khz_ref, ref_freq,
freq->new);
- if (use_tsc) {
- if (!(freq->flags & CPUFREQ_CONST_LOOPS)) {
- fast_gettimeoffset_quotient =
cpufreq_scale(fast_gettimeoffset_ref, freq->new, ref_freq);
- set_cyc2ns_scale(cpu_khz/1000);
- }
- }
-#endif
- }
-
- if (val != CPUFREQ_RESUMECHANGE)
- write_sequnlock_irq(&xtime_lock);
-
- return 0;
-}
-
-static struct notifier_block time_cpufreq_notifier_block = {
- .notifier_call = time_cpufreq_notifier
-};
-
-
-static int __init cpufreq_tsc(void)
-{
- int ret;
- INIT_WORK(&cpufreq_delayed_get_work, handle_cpufreq_delayed_get, NULL);
- ret = cpufreq_register_notifier(&time_cpufreq_notifier_block,
- CPUFREQ_TRANSITION_NOTIFIER);
- if (!ret)
- cpufreq_init = 1;
- return ret;
-}
-core_initcall(cpufreq_tsc);
-
-#else /* CONFIG_CPU_FREQ */
-static inline void cpufreq_delayed_get(void) { return; }
-#endif
-
-
-static int init_tsc(char* override)
-{
- u64 __cpu_khz;
-
- __cpu_khz = HYPERVISOR_shared_info->cpu_freq;
- do_div(__cpu_khz, 1000);
- cpu_khz = (u32)__cpu_khz;
- printk(KERN_INFO "Xen reported: %lu.%03lu MHz processor.\n",
- cpu_khz / 1000, cpu_khz % 1000);
-
- /* (10^6 * 2^32) / cpu_hz = (10^3 * 2^32) / cpu_khz =
- (2^32 * 1 / (clocks/us)) */
- {
- unsigned long eax=0, edx=1000;
- __asm__("divl %2"
- :"=a" (fast_gettimeoffset_quotient), "=d" (edx)
- :"r" (cpu_khz),
- "0" (eax), "1" (edx));
- }
-
- set_cyc2ns_scale(cpu_khz/1000);
-
- use_tsc = 1;
-
- return 0;
-}
-
-static int __init tsc_setup(char *str)
-{
- printk(KERN_WARNING "notsc: cannot disable TSC in Xen/Linux.\n");
- return 1;
-}
-__setup("notsc", tsc_setup);
-
-
-
-/************************************************************/
-
-/* tsc timer_opts struct */
-struct timer_opts timer_tsc = {
- .name = "tsc",
- .mark_offset = mark_offset_tsc,
- .get_offset = get_offset_tsc,
- .monotonic_clock = monotonic_clock_tsc,
- .delay = delay_tsc,
-};
-
-struct init_timer_opts timer_tsc_init = {
- .init = init_tsc,
- .opts = &timer_tsc,
-};
_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog
|
Home